bracelet query

Pin It now!

Early this month I was approached by a lady, Beata S, to help with a bracelet pattern. She showed me a pic and I immediately thought of a single shuttle pattern. However, the rings were so clearly overlapping, that it created some confusion and I veered towards interlaced split rings. That I was seeing the image on a small screen didn't help either. I can't show that pic for obvious reasons,

I asked my PIC Ninetta for confirmation and she quickly came back with a couple of WIP pics and it was such a relief. 

This bracelet is almost as basic as they come, quick to tat up, and a great way to embellish or use as a lanyard, jewellery piece, etc. It has dimension, texture, and strength. 

The following pics are a very quick stepwise pictorial using thick thread and large pearl beads. The size of ring will depend on the size of the bead - let the ring be just a tad larger.

1. String beads onto to shuttle thread and tat a ring.

Slip the bead towards the ring just tatted.

    Each ring is 12 ds ; 4mm pearl beads ; size 3 thread.

 

2. Leaving just enough bare thread to span the distance between previous ring and bead, tat the next ring.

3. Pass a crochet hook through the top of the previous ring and pull up the new ring through it,  centering the bead in the previous ring.

4. Continue these steps for the desired length.

Many variations are possible, obviously, including more than one bead in the center, seed beads around the ring, etc. 

Check out Ninetta's numerous Russian-inspired versions here - https://ninettacaruso.blogspot.com/2019/08/russian-inspired-bracelets.html

5. This is how it looks from the back. Notice the bare thread between rings. It can be avoided by using seed beads to cover the bare thread, thus making the braid reversible with kind of a dual look.

I really wish I could have made a better version - intended but not executed. Perhaps in future. At present I am working in fits and starts.

As soon as I was satisfied, I typed out instructions to Beata, and told her I would send the pics in a bit. I had barely uploaded the pics when I received her beautiful version! She was not only quick, but so neat! 

It is always satisfying to answer a query and be of help. And we learn in the process, too. I have often had to delve deeper into a technique to answer a question, thus improving my own understanding. 

UPDATE: (19th April 2024) Beata Saifer just sent me this new image of her bracelet and graciously permitted me to share it here ---

Thank you, Beata! It's been nice corresponding and chatting with you!

UPDATE (May 2024): Corina Meyfeldt used a different method (Collar Rings) to achieve the same result. https://cmhandmade.blogspot.com/2014/07/hello-jaden.html

UPDATE (July 2024): Mad Jar Tatting had uploaded a video demonstrating how to tat this braid. While the outcome is the same, she tats a line of alternating rings and beads to desired length. Then she starts weaving the rings. https://www.youtube.com/watch?v=rIrGNrkWHJE - Ring with Beads in size 20

Related Posts
https://tipsaroundthehome.blogspot.com/2019/05/russian-bracelet-and-brooch.html
https://tipsaroundthehome.blogspot.com/2019/07/bunch-of-pattern-updates.html
https://tipsaroundthehome.blogspot.com/2019/09/duh-moments.html

Auld is gold

Pin It now!

Snowflake #15 in Land of Laces’ 25 Snowflake Project

Wreath Snowflake

(& possible ice drop)

This is a prototype using Rhoda Auld’s bobble technique, based on Ninetta Caruso’s pictorial and can be worked in one pass.

The colours, texture, and central hollow create a wreath-like effect that can be inserted over a bauble or a candle. It can be suspended as a tree ornament or add bling for earrings or pendant. We can also continue on the back with a ring/chain round to encase a gem for an ice drop.

Model tatted with Anchor Pearl Cotton size 8 measures a tad over 1¾”. The glass gem has a diameter of just over ¾”

A rings-only pattern using 2 shuttles to stack them facing opposite directions (ring as fish). If it is your first time using Auld’s bobble, I recommend first trying Ninetta’s pictorial and then making one motif (repeat) of this pattern with scrap threads before attempting the actual flake.

Abbreviations and Notes :

Sh = shuttle. R = ring . SS = switch shuttle. JR = Josephine ring (half stitches)

Sh1 – green ; Sh2 – red

I tatted over tails at the start, hiding under respective rings.

Θ -  Rhoda Auld's method to join stacked rings, as shown by Ninetta. It basically captures the other shuttle thread within the open ring, between 2 stitches.

For odd rings (green here), follow Ninetta’s method. Pass Sh2 through ring from behind, and over the shuttle (core) thread.

For even rings (red here), do the opposite : pass Sh1 over Sh2 core from above and down through ring loop.

Always keep previous work to the left.

RW = reverse work. I started off without any reverse work as in the tutorial, but found that the thread emerged on the ‘wrong’ side of ring. For some reason, RW made it easier to manage the bare thread space! Hence, it is better to RW after each ring in this pattern. 

bts – Sh2 (red) bare thread space about 1ds wide on the outer edge of both sides of the odd rings, ie. a total of 2 or 2½ ds wide bts

Do not leave any bts before starting green odd rings.

Pattern : 

Sh1 : R1: 3 Θ 3. rw, SS

Sh2 : R2: bts, 6 Θ 6. rw, SS rotate

Sh1 : R3: 9 Θ 9. rw, SS rotate

Sh2 : R4: bts, 12 Θ 12. rotate

         JR: 10. rw, SS  Capture with overhand tie to center the floating ring.

Sh1 : R5: 9 Θ 9. rw, SS

Sh2 : R6: bts, 6 Θ 6. rw, SS

This completes the first motif. Repeat 5 more times, joining back in a circle.

Do not cut thread. Continue around the inner margin with a lock chain. (I had already cut off threads when the idea occurred, hence you see a green lock chain).

Lock Chain : [5 +(space after R1)]x6.

Cut and tie and hide ends.

OR continue with the lock chain to make a loop for tree ornament.

OR continue at the back with rings and chains to encase a cabochon for ice drop.

I am not happy with my Josephine rings. Pearl cotton is not a good thread for tiny rings or JRs. Perhaps next time I will use beads instead.

My initial idea was to use stacked rings only as a central round, adding more round(s) on the outside. But I like the shape and didn’t feel like disturbing it. The idea for outlining the Inside, came to me suddenly a couple of hours back, and I made the lock chain.

Another idea alongside, was to make David’s Star in the negative space using interwoven lock chains.

What do you think? Your opinion and suggestions are valuable, so please speak freely.

TõTõT

Have I told you yet? Since mid-2017, I haven’t uploaded any pics to my pattern page – it is already so crowded!!! Then I had this idea and started a few months back - listing all my patterns in Google Doc files, category-wise. It is easy to update and see at a glance. The Snowflake patterns are all up to date with a photo and links. Even if a pattern has a pdf file, I request you to go to the respective blog post since that is where I may post more tips, and updates. And comments often offer a lot of ideas J

 ËÌËÌË happy deepavali  ËÌËÌË

the jinx of 13

Pin It now!

#13 in Land of Laces’ 25 Snowflake Project

I don’t much care for the supposed jinx of this being the 13^th flake ;-P But this back from the old snowflake/star has me stumped for a weird reason. It uses my Overlapping Split Rings effect. More effects here, including a square arrangement.

MUTANT  SNOWFLAKE - 

design evolution

Here’s some history –

1. This was a trial prototype from 2016 in Anchor 20. At 5 points/arms, it lays flat.

2. Elaborating on the idea, I converted it into a 6-point flake using Anchor Pearl cotton size 8. There was some cupping. I left it in my tatting box overnight and in the morning, it was pretty flat, and more so after some quick blocking.

I went back to my Jottings about cupping/ruffling and worked in the corrections in next trial... 
Basically cupping occurs when outer round is tight. To avoid it, decrease inner round or increase outer round.

3. Wondering how it would look in a single colour, I chose Anchor 20, but the center rings are 1 stitch short (to reduce the center and tackle cupping). Major cupping which did settle after tugging and blocking!

The split rings have 1 extra stitch and this translated into a slightly different more roundish overlap.

4. Fell back on the maroon pattern using Lizbeth 20 threads. And guess what, I had to make 8 repeats for the flake to lie flat by itself!

Pearl cotton differs in it’s looser twist when compared to Lizbeth, but they tat up to the same final measurements. So what just happened?!!

I was ready to share the 8-armed snowflake which is part of the reason it is called Mutant. Seems like the thread and picot characteristics can lead to anywhere from 5 to 8 arms ;-D

It is a mutant in terms of it’s faux Celtic effect. Not true Irish, a bit of a freak ;-P

The online tatting world has blessed me with some excellent friends. Jane McLellan came to my rescue recently; this time is was Ninetta Caruso & Anita Barry.

They sent me possible reasons, solutions, options and enthusiastically volunteered to tat the flake, too. They were ready to count from the image, but I managed to quickly type them some shorthand notations. They will be doing it today.

Would you like to read what these experienced designers/teachers have to say? It is a design bonanza - insightful designing tips, and if you are interested, I’ll share in my next post.

So, what do you think – would you like to tat this 8-armed snowflake or are you a stickler for 6 dendrites?!

duh moments

Pin It now!

Seems like ages since I tried/learned something new besides my designing project.

I scrolled back through my posts and the last interlacing project remains in limbo and it was May when I did this! 

Meanwhile Ninetta has been posting so many enticing new effects and patterns, sigh.

Now when I need my beadbox, I try to do multiple projects with beads in one go. It’s like sewing – I pile up my sewing projects and then sit at the machine at a stretch.

Perfect time to try Ninetta’s Interlacing Methods. Loaded one shuttle with the magenta pearl cotton (size 8) and used this for all 3, changing only the chain and bead colours.

I started with her ring and chains method first. Clear instructions and pictures – enjoyed it tremendously. This is the Second Method.

Trying to capture the double-chain from different angles to show how lovely the effect is.
The curled ring finish looks like a rose!

Time to try the beaded method (First Method). see Duh Moment #2 below !
I alternated the bead colour for fun...

TIP: It is easier to pull the ring(s) through using a crochet hook.

Duh Moment #1.
After both trials, I kept thinking that the very last chain should be half the length of the earlier chains. Notice how it sticks out in both versions?

She already factored it in… if only I had carefully read through her bracelet patterns!!!

Duh Moment #2.
While working both, I didn’t really notice any difference in the interlacing methods.

No difference because it was the 2^nd method again, stupid!!! 
Guess when I realised it – just now when I went back to her post for correct reference and terms, etc.

Her giggly earrings had caught my imagination right away. It tats up real quick and looks so pretty. Oh, but the number of beads to be loaded!!! I need to adjust the rings a bit more to make them settle properly.

I hope it doesn’t turn into a Duh Moment #3 – I’m sticking my neck out here… 

It appears that her First Method of interlacing is kind of a transition between Second method and the earrings. Interlacing by pulling 1 ring in 2^nd method; 2 rings in 1^st method; and multiple rings (graduated size adds a braided effect) in earrings.

Keep them coming, Nin, I’ll surely catch up in one life or another ;-P

layering effects

Pin It now!

I’ve been revisiting a few techniques – both using layered or stacked rings - to refresh my memory.

Ninetta’s modern adaptation using a floating layered ring was my first stop. I converted it into a flower pattern. DH thought it looked like a lotus! Lotus motif is a fairly common sight in temple architecture, decorative ceilings in buildings/rooms, Jaipur-style paintings, etc. That settled the name ....

Lotus Medallion

(prototype)

In Anchor size 20, the finished flower measures 6cms across.

The inner medallion uses the same stitchcount and process as Dillmont’s original motif. Except that I made 6 rings instead of 4 – which meant I had to add 2 more picots to the floating ring. All details here. This center can be made with a single shuttle and a long tail pulled out to work the floating ring and 2ds of split ring.
This is a modern variation of the rosette or enclosed space medallion.

I hadn’t planned anything specific. But this looked so forlorn that I had to do something to cheer it up ;-P

I continued with the layering theme, this time with chains. When did I last use 4 shuttles? Time to set them up :-D Tried out my idea with some scraps and ran out of the red at this stage. 

Starting again, I used light and dark shades of the same colour - this contributes to the 3D effect. 

Yes, those are dot picots in a diamond arrangement! Can't stay away from experimenting ;-P Here's how I worked it ... Dot Picot tutorial links here

Work a string of 3 dot picots with shuttle 2, and 1 dot picot with shuttle 1.

Note : When making this dot picot with shuttle 1, leave a very tiny bit of thread on both sides.

In order to make the make the single picot clearly visible, 

I used the Floating Beads with tatted rings method, tying an overhand knot around the base of the dot picot. 

The faux bead now rests at a slight distance from the chain.

Now start the chain close to the faux beads. 

When the chain is tensioned, the 4 dot picots form a kind of diamond shape. 

If one is using beads instead of dot picots, this round can be worked with 2 shuttles attached to respective balls. Pre-string 18 seed beads in each ball, and 6 seed beads in each shuttle.

Chains on either side of the faux beads have 10 stitches each. But this can be changed to suit one's taste.  

Chains are lock joined to the picots on inner medallion. But remember to overlap the new chain Before making a lock join with the previous one. Also keep the overlap direction consistent throughout. An under/over overlap as in the model helps when making the final chains and joins.

If using single colour throughout, one can climb out of the inner round with a split ring.

So what's your verdict ? And suggestions ? Colour choices? 

Once I have your opinion I will work another model and present the final pattern. 

happy tatting always J

undulating with one shuttle

Pin It now!

single shuttle medallions with tatting pattern

Thought I’d take a mini break from the project I’m working on (forgot to ask permission for sharing, so we’ll have to wait a while longer) to keep my blog alive ;-D

These were done earlier in the month, continuing with the theme of single shuttle medallions.

Undulating !

single  shuttle  medallions

There are 2 versions, with more to come – there is so much scope in the basic idea. What I showcase as Version 2 was really tatted first, but the pink one is pretty generic with huge potential, as seen in the montage below ....

version 1  prototype

This is a simple braid of half closed or half rings (HR), each of 15 stitches.

In size 20 thread, I used a picot gauge of ⅜ inch for bare thread space of half-closed rings.

Reverse work (RW) after each half ring so that alternate rings face in opposite directions.

8 half rings can be joined back into a square.

10 half rings can be joined back into a star or flower.

… and so on.

Add picots for securing the inner rings, and decorative picots on outer rings.

A pearl in the center of each half ring would look pretty for jewelry.

version 2  prototype

This is made in 2 continuous rounds, with a rosette center and half rings (HR) around. A single shuttle split ring (SSSR) is used to climb out.

Leave a tail at the start in order to secure the last SSSR*.

Rosette (worked in clockwise direction from front)

Ring1  : 3 – 5 – 5 – 5 – 5 – 3 DNRW

Ring2  : 3 + 5 – 5 – 5 – 5 – 3 DNRW

Ring3  : 3 + 5 – 5 – 5 – 5 – 3 DNRW

SSSR4 : 3 + 5 – 5 / 5 – 5 + 3 . Pass tail through the loop before closing ring. DNRW

Outer round of half rings (worked clockwise from front)

[HR1 : 15 RW    (⅜ inch bare thread space in each half ring)

HR2 : 15 LJ , RW] x 4

* The last SSSR has to be joined to first ring, and I chose to do it Takeda-style, passing the starting tail through the SSSR loop before closing it finally. 
Tug on tail and then sew it under caps of ring to hide. 

One can use Dora Young’s split ring technique, too. Some SSSR tutorial links are listed here.

Add decorative picots or beads as desired. These can probably make nice pendants & earrings ?

I was hoping to make many more variations of the above, and more versions. But all that is taking a backseat.

Okay I’ve had my rest, unwinded a bit, and some of the blocked pieces must’ve long dried. Back to my secret project, then…

More from single shuttle medallion challenge - PART 1 ; PART 2

Happy Tatting !

miniature conifer

Pin It now!

A tatted tree

Grace did such an admirable job of creating a pair of Christmas tree earrings in 3D, using the simplest of techniques and dressed up with beads! How could one resist – 3D combined with freeform was calling out to me. It seems like ages since I made something in 3D freeform – I’ve been domesticated ;-P

3D Christmas Tree

Earrings by Grace O B Tan 

free pattern here

A 2-shuttle pattern with rings thrown off a spiral (Josephine) chain. 

In size 20 thread it is 2 inches high (including the trunk)

»»»»»»»»»»»««««««««««««

Au Naturel ! 

My first test tat was without beads. I deliberately went for a natural look, the intention being to wrap a string of beads later, like fairy lights. This has taken a backseat coz the tiny tree became fiddly to work with and gold thread was tangling up – need More Hands !!! But last night I had an idea to anchor the tree while I wrap it. Hope it works.

TIP : Tying/inserting a marker at end or start of each layer helps to keep track as the foliage becomes denser. See the 2 threads knotted on the in-progress foliage?

So much fun ! A simple string of mostly decreasing rings, tightly packed down on a spiral chain –that’s it! Brilliant.

TIP : Ensure the spiral chain stitches do not ‘unflip’ at any time, before working on a new ring, and after closing it too. The core thread of chain should continue to slide.

This may not be a problem for tight tatters, but for me the half stitches did tend to unflip at times.

Couldn’t find a bead that would work as a trunk (didn’t like the round wooden beads I had). Left paper clips in place of the trunk bead, to allow core thread to slide.

This called for a trunk call to tatting! The tatted 3D trunk was sewn on later (pattern at end).

DH can’t get over how Real this miniature looks - both the foliage alone, as well as complete tree and I am very happy with it, though there are a few slips (a definite advantage in freeform tatting!). It looks so cute, and tiny – merely 2” high !

I used Red Heart green (229) and brown (341) in size 20

»»»»»»»»»»»««««««««««««

It is very quick to tat up sans beads & much more fun. But beads add sparkle, character, and cheerfulness !

Au Noel !

Got out my shuttles and beads and stuff; sat in the sunlit balcony, and strung beads. It went surprisingly smoothly - there’s nothing like natural light !!!

I did have to load my shuttle thrice (Pony shuttles are small), but fortunately I had strung around 200 beads on the ball thread, and took only about one-third for each bobbin load cutting the thread and leaving the rest of the beads on the ball thread.

TIP  : The lower half contains large rings. To keep track of the stitches, I listed the picot count for ring in that layer. Eg. Layer 1 rings have 10 picots; layer 2 rings have 13 picots, and so on. Helped me immensely.

I used Anchor green (0245) in size 20 for foliage here. Except for the gold beads, all are transparent seed beads; a star sequin graces the tip. Since the  beads are plastic, they do not add weight to the tree. However, if using as earrings, a light starching might help to keep the foliage in desired shape. I didn't make earrings; can be used as tree ornaments or how about tassels for a Christmasy gift!

IDEAS  : This pattern can be adapted to .....
... make 3D flowers in a jiffy ! Adjust ring count & size, and choose flowery colours, OR
make a twig with fir needles – long picots (snipped) on a spiral chain – how cool is that for a wreath ?!

»»»»»»»»»»»««««««««««««

Meanwhile for those interested, here’s the pattern for the tatted trunk …..

I’ve been holding out on this pattern (a prototype peek here), wanting to add beads & colours to highlight the spiraling effect. May be soon, now.

Tatted 3D Tree Trunk 
pattern

2 shuttles CTM. Size 20 thread.

Ø       Each ring, layered/stacked above the previous ring, creating a 3D hollow cylinder.

Ø       First & last rings are normal rings ; all in-between rings are split rings.

Ø       Keep the picots normal to slightly long, depending on how much distance you want between the stacked rings.

Ø       Mock picot (MP) is used to climb out of each ring.

Ø       Switch shuttle (SS) after each ring.

Ø       A total of 6 to 7 rings is sufficient for the tree pattern above.

Ø       See pictorials on layered rings here  , and here .

R1 : 4 – 4 – 4 – 4 . MP

** SR2 : 2 – 2 + 2 – 2 + 2 – 2 + 2 / 2 . MP. SS **

Repeat  from ** to ** for desired length (or height) 

Last Ring : 4 + 4 + 4 + 4 . 

Use the tail ends to sew to the foliage. 
Tie ends and insert the tails through the hollow tube and snip. 

Many many thanks to Grace for sharing her delightful  pattern with us !

happy tatting always 
and happy holidays :-) 

Related Posts :

Layered or stacked Rings how-to method 1 ; method 2