incredible spirit

Pin It now!

Indomitable, indefatigable, inspiring spirit! This is how I see Donna McDade, my incredible 86 year old friend! You might remember her previous participation in my DAL 2023 where she belted out 5 Celtic snowflakes. This time she broke her own record. Read on to be impressed again .... 

All the DAL 2025 challenge entries can be found here - https://docs.google.com/document/d/1mQmdXWXQmcbXQ48nRz9FBeTJf_DoJqKz/view

This post is long long long delayed! My main delay was because I wanted to diagram all her versions for clear patterns. Unfortunately only one has been done so far. But the task is still in my to-do list, just pushed further ... And then I couldn't get my head to cooperate and so many other distractions kept creeping in. There is also lots of celebratory news from Donna's creativity, too, which I will share in a 2nd post. 

Donna started by tatting 6 DAL 2025 motifs as seen below ... Note that there are only 6 motifs here while later she added a 7th and a larger 8th, too.

And following is how the outer rounds designed and tatted by her turned the basic motif into such lovely versions!

Version 1 - Curled Ring at Chain

This is very interesting. At first glance it looks like a repeat of the previous round. However, using two shuttles, she makes two rings one of which curls over the previous ring. I think it is a clever application. 

Version 2 - Topped with Trefoils

I was able to complete the diagram for this single-shuttle round that she designed.

Version 3 - Spot Me

I chose this name because I couldn't really spot the 'mistakes' which had Donna cursing the 'Evil Tat Demon'! The pink shade, though, is the red bleeding into the white. 

Version 4 - Flower

The model says it all!

Version 5 - X & O Rings

 

This is what Donna called her 5th version (A and B) with simple split ring round and then weaving another split ring braid through the former. It suddenly gets uplifted from a simple split ring round, doesn't it.

Version 6 - Curls and Folds

Can you identify the variety of rings used in this version? Besides the normal rings in the center, there are curled, split, and folded rings and well as folded chains! Some of the folded rings didn't quite measure up since it was her first attempt at them inspired by my Folded Fun motifs published in the IOLI Bulletin.

Version 7 - Beaded

Quite festive! With plenty of potential for more embellishments.

BONUS! Curled Rings Cross

Donna increased the repeats from 6 to 8 enabling her to design the cross with lots of curled rings. The cross is already sewed on to fabric. 

And all the 7 versions together. These motifs also found their spot on a quilt as seen in the lead pic above! Donna's twin passions - quilting and tatting. Most of her tatted motifs are appliqued to her handmade quilts.

I would like you to return to read my next post and see the creative talents of this incredible lady. Adding it here would not do justice to her work and accomplishments.

💦💦💦

If you wish to try your hand at designing more rounds, jump in any time and contact me with your version.
Pattern: https://tipsaroundthehome.blogspot.com/2025/02/dal-2025-challenge.html
1st round-up: https://tipsaroundthehome.blogspot.com/2025/03/colour-me-happy.html
2nd round-up: https://tipsaroundthehome.blogspot.com/2025/06/design-tatting.html

All participant patterns:  https://docs.google.com/document/d/1mQmdXWXQmcbXQ48nRz9FBeTJf_DoJqKz/view

Many many thanks for your enthusiastic participation ... hope your indomitable spirit rubs off on me, too!

design tatting

Pin It now!

 Its been a while since I updated the entries that came in for my DAL 2025 challenge. I shared the first 7 versions (with patterns!) here - https://tipsaroundthehome.blogspot.com/2025/03/colour-me-happy.html. Now, the next one to start the challenge was Donna McDade who made 8 versions (3 up from last year's DAL)! I will dedicate an entire post to her next time, since there is a lot of good news to share and celebrate. Meanwhile, these are what my other wonderful participants sent in .....

All versions of Muskaan's DAL 2025 Challenge can be found here -https://docs.google.com/document/d/1mQmdXWXQmcbXQ48nRz9FBeTJf_DoJqKz/view

Anita Barry 

See the dense 3rd round? Those are Louise Uteg's stacked rings from her 1970s original doily!  

I think this 4-round version looks like a nice Christmas wreath.

Padma Mandayam

Round 3 was inspired and adapted from Lella Loops' version, with the addition of a 4th original round.

Written pattern is shared in the google doc.

Janet Crow

A colourful spring version with inclusion of butterflies and more rounds. She graciously presented the pattern in a PDF. https://drive.google.com/file/d/16wfGTDxjNovnfWMYmZfqIgn1tmwDzIgY/view

The motif glued to her hand-sewn bag in which she carries her tatting supplies to meetings, etc.!

Lillyan

Janet's 14 year-old talented granddaughter is trying her hand at many crafts, including tatting! Her version is like clubbing where she adapted and applied Karey Solomon's Cat & Mice pattern. Pattern will be shared if they get due permission.

 Margaret Davies

Despite all the curve balls life throws her way, Margaret has valiantly participated again. She shared her WIP here - https://margaretsdesignercards.blogspot.com/2025/03/happy-international-tatting-day-and.html

Her 5th round ruffled and she decided to cut it off. While this modification lays flat, she might tweak the stitch count at a future date. Hence no pattern shared yet.  

Elisabeth Dobbler   worked the initial 2-round motif but was discouraged with the way her picots came out. Shelved for the present. The WIP pic is in the doc.

Join in whenever you can! This is open-ended. Perhaps I will also climb out of my limbo to add another round or two to my own version.

Words fail to express my gratitude and happiness to all participants! 

Related Posts
https://tipsaroundthehome.blogspot.com/2025/02/dal-2025-challenge.html  Start the challenge any time you wish, and send me your version!
https://tipsaroundthehome.blogspot.com/2025/03/colour-me-happy.html  First batch of DAL 2025 versions

https://tipsaroundthehome.blogspot.com/search/label/DAL  Previous DAL challenges

DAL 2025 challenge

Pin It now!

 Well, I wanted to show some techniques/effects for glossary entries and decided to create a motif to incorporate them. It resulted in a very simple motif, nothing fancy. It may not even be original though I did not refer to or look for any patterns. and it's still a work in progress. 

I kind of like how it looks so far and it could very well be the starting center for a larger motif, if you wish to participate in yet another Design Along (DAL). Tat this two-round motif and then design as many rounds as you wish around it. Sharing your stitch count/pattern is highly appreciated. All will be shared in my blog.

NOTE: I started with a single-shuttle rosette with the intention to cut away later rounds and reuse it for other samples, hence I cut off the thread and hid tails. However, you are free to climb out by making the 6th ring a split ring. Remember to use two shuttles for continuous tatting.

Muskaan's DAL 2025 Challenge

Round 1 - Rosette - one shuttle or two shuttles, continuous thread
ringA: 5-6-6-5. do not reverse work

ringB: 5+6-6-5. do not reverse work

Repeat ringB till you have a total of 6 rings, joining the 6th ring to the first ring.

Cut and hide ends OR climb out with the last ring as a split ring.

Round 2 - Curled Rings  (CR)- one shuttle and ball or continue with two shuttles.
CR: 10-10. Curl around any rosette ring. 
Chain: 2 (-2)×9. Repeat all around. 

NOTE: Picots are 3.5mm high or open picot is 7mm long. [My motif is worked in Anchor size 20, which is similar to Lizbeth size 10).

Hope you like the motif and would be interested in designing and tatting more rounds. Leave a comment or contact/tag me on Facebook or Instagram.

Take it away, friends!

My next round is already decided which is why I have all those picots in the 2nd round. Will share when it is finished. 

Some of my previous DALs can be found here -  https://tipsaroundthehome.blogspot.com/search/label/DAL

And tutorials/videos for all techniques can be found here - https://tipsaroundthehome.blogspot.com/p/tatting-resources.html

UPDATE (12th March 2025) - the first batch of lovelies! -- https://tipsaroundthehome.blogspot.com/2025/03/colour-me-happy.html

duh moments

Pin It now!

Seems like ages since I tried/learned something new besides my designing project.

I scrolled back through my posts and the last interlacing project remains in limbo and it was May when I did this! 

Meanwhile Ninetta has been posting so many enticing new effects and patterns, sigh.

Now when I need my beadbox, I try to do multiple projects with beads in one go. It’s like sewing – I pile up my sewing projects and then sit at the machine at a stretch.

Perfect time to try Ninetta’s Interlacing Methods. Loaded one shuttle with the magenta pearl cotton (size 8) and used this for all 3, changing only the chain and bead colours.

I started with her ring and chains method first. Clear instructions and pictures – enjoyed it tremendously. This is the Second Method.

Trying to capture the double-chain from different angles to show how lovely the effect is.
The curled ring finish looks like a rose!

Time to try the beaded method (First Method). see Duh Moment #2 below !
I alternated the bead colour for fun...

TIP: It is easier to pull the ring(s) through using a crochet hook.

Duh Moment #1.
After both trials, I kept thinking that the very last chain should be half the length of the earlier chains. Notice how it sticks out in both versions?

She already factored it in… if only I had carefully read through her bracelet patterns!!!

Duh Moment #2.
While working both, I didn’t really notice any difference in the interlacing methods.

No difference because it was the 2^nd method again, stupid!!! 
Guess when I realised it – just now when I went back to her post for correct reference and terms, etc.

Her giggly earrings had caught my imagination right away. It tats up real quick and looks so pretty. Oh, but the number of beads to be loaded!!! I need to adjust the rings a bit more to make them settle properly.

I hope it doesn’t turn into a Duh Moment #3 – I’m sticking my neck out here… 

It appears that her First Method of interlacing is kind of a transition between Second method and the earrings. Interlacing by pulling 1 ring in 2^nd method; 2 rings in 1^st method; and multiple rings (graduated size adds a braided effect) in earrings.

Keep them coming, Nin, I’ll surely catch up in one life or another ;-P

my Italian connection

Pin It now!

Italian Connection bookmark    (a sneak peek)

You’ll soon see the reason for this name which led to the choice of books as well.

This motif is the First pattern designed by an Italian tatter, Patty Castagno and shared in the facebook group - Chiacchierino: Filo, Amore e Fantasia. It is a very creative and talented group but mostly in Italian. Which is why facebook's instant translation is a boon, though literal and sometimes confusing.

The promise of a square spiral attracted me immediately, but my first attempt (purple size 8 pearl) was surprisingly tough & confusing. 

Since I couldn’t understand why it was difficult, I had another go at it, this time in blue (size 20 Anchor). Worked up smooth as silk!!! Huh. Where was my head ???

Three’s Company! Hence a 3^rd motif tatted in green (size 40 Anchor) for tapering bookmark.

There is a ¼” difference between each motif.

Now how should I connect these motifs – each a different size, with no peripheral picots? Here’s where more Italian connection came in. Ninetta’s curled rings!

These curled ring connectors are rings folded exactly in half and lock joined through the middle picot in each, encasing a motif (chain) within.

Even the tassel is encased within these connectors.

I’ve used curled rings for toggles, etc. but I think this Curled Ring Connector has great potential and use in jewellery or to link individual motifs of different shapes, sizes, and designs! They can also be used in place of adjustable toggles since whatever is within can slide. Or how about attaching motif to a bangle for sun/dream catchers?!

This post was intended for April 1^st – ITD, which is why I included Teri Dusenbury’s dandelion chain link bookmark which I believe is a construction and engineering marvel in tatting. And among my most viewed projects.

Leonardo da Vinci: Artist, Thinker and Man of Science by Eugène Mũntz. A coffee table box set of 2 large hardcover volumes with lots of his diagrams, studies, ideas, sketches, etc. as well as finished works. Detailed, in-depth exploration. I have barely scratched the surface of these, but quite a treasure.


So would you like the pattern? I have Patty Castagno's gracious permission and here’s what she said (translated from Italian) when I sent her a close-up pic:  

Beautiful, beautiful, fabulous, you did an exceptional job, do whatever you want with my scheme, you made it a very good thank you

Now it is I who must ask you if I can take inspiration from your masterpiece

I need to ink the stitch count, and work on a presentation, but soon...

My previous Italian connection ...

due credit

Pin It now!

Ninetta’s Curled Ring Ice Drop that I posted here was taken up in Online Tatting Class on Feb 18^th along with Ninetta's original post/pattern.

Undue credit was given to me (not that I'm complaining when my name is linked with that of my very talented friend's ;-P). I’d like to reiterate again, that the pattern is Entirely Ninetta’s. Arguably perhaps the only ‘contribution’ I made is the following :

• using 2 colours that highlighted the curled ring effect ;

For 1st (top) motif, load one shuttle only with seed beads

• not tatting the entire pattern thus making it look more like an ice drop. In the original the last round turned it into a square with floating hearts in the corners ;

1st (top) motif made

• using the word Celtic/faux Celtic. Reason: the gem is encased using 2 motifs. Remember Rosemary Peel's famous square motif where the 2^nd motif is interwoven through elements of 1^st and then a 3^rd round is added which connects and holds the 2 motifs in place? I was reminded of it here. EXCEPT ....

For 2nd motif (seen from back) wind thread ctm. Silver used here.

What Ninetta did was curl the rings (immediately after closing each) through 1^st motif, thus securing them in place and also forming a pocket to insert the gem. So while a 2^nd motif was tatted, it was not 'separate', joining as we go. 
For this reason, only 2 rounds performed the function making it easy to stop at this stage; the 3^rd round in her original pattern merely added decorative value.

Many more stepwise pictures are posted in Ninetta's blog in the link provided above.

lll

What if the 2 motifs actually were separate? This is how they would look (I have increased the size of silver rings to 12-12)....

A Celtic variation in progress

Notice how the upper and lower motifs are completely separate, then placing them over each other, the silver is interlaced, and the gem inserted before interlacing the last ring. However, the silver rings are floppy and need another round of tatting to hold them together. 
Ninetta's curled rings engineered the feat without the need of another round as pointed above. 

lll

We thank Georgia, again, for her interest in this beautiful design and for sharing it with the class. I only wish I could attend the same way as a year back. Over-enthusiastically, I would sometimes attend even the first session which starts at about 0030 hrs my time! No wonder it affected my health and constitution. I miss the motivating and learned company! 
Congratulations are also due - she completes 40 years of tatting !!! Wishes for many many more to come J

curled and celtic

Pin It now!

Overcoming the lethargy to work with beads means I take the opportunity to work a few projects in quick succession! This time it is Ninetta’s ice drop with curled rings. Well, it does have another round with treble hearts, which changes the circle to a square. I stopped at 2 rounds since this appealed to me even more.

The variegated didn’t quite turn out as pretty as I'd visualized. And as you can see, using it for the curled rings makes it look too busy. Went with silver (on right) and snipped off the earlier part.

TIP : To get the curled ring to look like a heart, insert the ring (the picot end) from below and fold/curl from above. This difference is clearly visible between the first 2 curls on the left.

As recommended, I chose a 2cms glass pebble. Yet for some reason it looked like 8 repeats would be too tight a fit, so a 9^th was added. No, didn’t need it!

I like the clever way she used 2 motifs to interlace and trap the cabochon within! Faux Celtic along with curled rings and more – nice!! You can see the underbelly in Ninetta’s post – I forgot to take a pic. 

UPDATE (Feb 25) : Please read continuing post with some more pics and a WIP variation. This pattern was taught in Online Tatting Class on Feb 18th.

I have one more ice drop pendant to show you next time ... stay tuned :-))) 

Goldilocks meets a friend

Pin It now!

Remember how I couldn’t introduce you to Goldilocks since she was already in bed? 

The wait is over. Meet Goldilocks and her friend, Elana! 

Well, opposites attract again (see comments here)! Gold / silver; tiny / large; warm / cool; quick project / long project; AND our two friendly designers from different hemispheres!

Goldilocks is actually Ninetta’s Valentine earrings shared here. 

Closing the spiral ring using metallic thread was a tad dicey. Anyway, after making it with single shuttle, I switched the shuttle thread to regular cotton size 20, using gold for the visible stitches.

Lenka shared some nice pics on how to add beads in spiral rings. Do check out her beautiful applications of the spiral rings. 

Red Rose metallic gold size 20 & Anchor size 20. size 16 seed bead & crystal teardrop.

2+ cms across & 3+ cms long without teardrop.

Jane McLellan’s Elana has long been on my to-tat list. It is such an elegant pattern.

And I wanted to stick with blue and white. This is actually my 2^nd attempt; the first being left aside after 4 repeats for 2 reasons. But read what happened in next post here. (Update)

Notice the missing chain in first round? I used the double ring & chain sequence. And the rings on the back are 5-5-5.

I used bead as picot gauge method to load bead with a crochet hook only when it was time to link. Yet the small Pony shuttle bobbin had to be loaded twice.

Adjacent Ankars motifs are slightly tightly packed with some overlap – perhaps my seed bead was too large?

But I love how it looks despite the thick white thread! And finally another struck off the unending list

Blue glass gem - 2¼ cms x ½ cm high. The pebble is not absolutely clear but has shaken snowglobe effect.  Anchor white 20.  3½" diameter

2 projects, but so many techniques have been incorporated! My knid of tatting ;-P

And now that I have my beads and gems out, there are a couple more projects queued ;-D

cross my heart

Pin It now!

tatted square, cross and heart with patterns

I was bullied into testing this enchanting square - ‘expected’ not ‘requested’. ;-P Aye, aye Cap'n !

This post is also about the mistakes revealed through photography – too late to undo and too lazy to redo L

a square ...

The Enchanting Square by Usha Shah is a pretty small square, cleverly vinstructed, and quickly tatted up. The little dots and short chains make an interesting frill as an octagon.

Taking photographs is both a revelation and a headache. I could immediately see a cross emerge from this square if one of the arms were elongated. But it also revealed that I had wrongly sewn in the last chain. Oh well !

The motif ruffles while tatting but settles down with blocking.

a cross ...

Set about tatting the cross. Again, pretty easy. But I tatted with medium tension to prevent ruffling in next round. Ooofaff,  not a perfect circle. Deal with it. 

Unsure about the length required, I tatted the 3 short arms first. This gave an idea of proportion,. 3 repeats on the long arm were sufficient,  going down one side and then back up with chains only. 

I’m ashamed, but yet another mistake reared it’s ugly head in the pics – yes, yes, the inner ring of top arm has uneven number of stitches. No wonder it skews a bit. But I’ll just jot it down to design element coz thankfully it is on the top arm, not on one of the sides :-D

And yes, the cross ruffled too, but settled easily with blocking.

I must apologize to the designer for these inadvertent mistakes. If I had more time, I would certainly tat these up again.

Many many thanks, Usha, for sharing another lovely pattern J

and a heart .

I spoke about this single shuttle challenge in my earlier post (check out some of the lovely tatting displayed by the group here) .Hadn't realised that the challenge was to tat, not strictly design. But I like the create-own-design & already have another almost complete) that I had started a fourth medallion. I had a different path and design in mind, but shuttles – even a Single one – have a mind of their own ! It just would Not follow my command, and decided to turn into a heart.

I am sharing the prototype pattern (for the record, completed on June 1st) …

 Have a Heart!

prototype pattern of a single shuttle motif

A single shuttle motif with split rings (SSSR), half rings (HR), & curled rings (CR).

Showing sequence and types of ring

Round 1 -

Start 1^st SSSR with a tiny picot.

SSSR 1-4 : [3 – 10 / 5. post shuttle front to back]x 4. Join to picot. 

Round 2 –

R1 :3 + 3 – 3 – 3 DNRW

R2 : 3 + 6 – 3 – 3 DNRW

HR3 : 3 + 9 vsp 3. LJ DNRW

HR4 : 3 vsp 9 – 3. LJ DNRW

R5 : 3 + 3 – 6 – 3 DNRW

R6 : 3 – 3  – 3 – 3 . LJ 

BTS, Rotate

CR7 : 12 medium p 12. Pull ring thru nearest SSSR from under – over. LJ to curl. RW

HR8 : 2 – 2 RW

CR9 : 12 medium p 12. Pull ring thru nearest SSSR from under – over. LJ to curl.

T&C  

Can you see the head of an elephant, too ? Or a tatted impressionism of Lord Ganesh. Elongate the bottom half ring into a trunk and we have an elephant!

Don’t you agree that this heart needs tweaks?

I welcome your suggestions on how to improve this.

happy tatting mistakes and all J