multiple celebrations

Pin It now!

Yesterday I wrote about two celebrations of which one is actually a week away. Turns out we have a full house today. International Yoga Day, Father's Day, World Music Day, and our very own International Lace Day all came together on this June Solstice! 

These are my tatted motifs for the day - two from our Endrucks Project and the other a better version of my recent unhappy trial.

My name badge from the ILD FB page. 

Letter E from E41 derived by Manju Talekar.

This letter was tatted a few days back when I was doing the presentation for this pattern to ensure that the correct shuttle and instructions were presented.

And if I rotate the E by 90 degrees, we get M!!! A wee bit of tweaking for it to look better is all that's needed.

Letter E cursive from E32 derived by Paola Bevilacqua.

This one I tatted today! However instead of captured picots I used beads. I wanted something festive.

TIP: Although it called for 2 shuttles, I used a shuttle and ball with beads pre-strung on both! Using SCMR (mock rings) and reverse join as well as any relevant reposition method, I managed to avoid the 2nd shuttle!

Earrings with Interlaced Onion Rings designed by Lauretta Tondelli.

This time her onion rings comprised of true rings and not chains as in the unhappy trial post. I like this Much better!!! Of course since the 2nd and 3rd rings were large, I left a core thread loop (2 in case of the 3rd ring) midways so that the ring could be closed in 2 (or 3) phases. Pretty happy with the result, though I do see the need for improvement.

Also, I had to un-tat and re-tat with 2 less double stitch in each segment of the inner chain to get the proportions right.

The two Es together. Both pattern links are in my previous post. I wonder if I can tat all 6 versions during our celebratory week?

All motifs tatted in Anchor or Red Rose size 20.

So, how did you celebrate the day? 

lotus tatting

Pin It now!

 Every year I try to tat something for our Independence Day celebrations.... if not a dedicated project, then using the tricolour in whatever I may be working on at the time. This year I felt it was much more vital given the international and more importantly our domestic situation where the parties who are in the opposition at the center keep peddling falsehoods and agenda-driven false narratives in order to show the world that Indian democracy is on shaky ground, the election process is flawed and manipulated, etc. They do not hesitate to bad-mouth the country and its institutions in their hatred towards the democratically elected Prime Minister. They cannot even digest our superiority in our  retaliation (Operation Sindoor) to the terror attack on Indian tourists by nationals from the neighbouring country! 

Lotus is our national flower and this is my prototype. 

Now you may ask where is the third colour?! Good question.

I had started by using this motif as a charm for a bracelet with a white tatted band/braid, sprinkled with some blue. Every colour has its symbolic value which I have explained in previous years.

Now I wonder whether I will have sufficient time.

Another idea is to tat a few more motifs and glue to a greeting card, with tatted blue/white chains representing water. 

Which do you prefer?

I chose ANKARS style stacked rings or ring on ring technique. Though incidental, I like the fact that this technique came from Russia. I've read more Russian literature than American!

LOTUS  MOTIF 

(prototype) Pattern by Muskaan © Aug2025  

Single shuttle. Starting from the left orange ring ....

NOTE - since this is a prototype, there are a few count changes made along the way for the petals. I am happy with the flower count but the green rings can be stacked a bit more. Hence some tweaking of count will be needed. 

Start ring by leaving a small loop and tail over tails. This loop is later used to make a shepherd's crook join at the end. https://tipsaroundthehome.blogspot.com/search?q=shepherd+crook

ringA: 19 - 4 - 15. dnrw

ringB: {lies above A} 15 +(to A) 5 - 5 - 15. dnrw

ringC: {lies above B} 15 +(to B) 6 - 6 - 15. dnrw

ringD: {lies under C} 15 +(to C) 5 - 5 - 15. dnrw

ringE: {lies under D} 15 +(to D) 4 - 19. dnrw

Attach green thread and cut and hide orange tail. [UPDATE: See updated pattern here - https://tipsaroundthehome.blogspot.com/2025/08/independence-day-tatting.html]

ringF: 10 - 4 - 6. dnrw

ringG: {lies above F} 6 +(to F) 6 - 6 - 6. dnrw

ringH: {lies under G} 6 +(to G) 4 - 10. 

Join to starting loop at base of ringA and cut and hide tail.

TIP: I will join rings F & H or make the segments longer than 6ds in order to make the overlap more visible.

I don't know how original this motif is - it seems pretty basic to me. If you have seen anything similar, do please let me know so that we can acknowledge the designer.

In Anchor pearl cotton size 8 (equivalent to Lizbeth size 20) the motif is 3.5cms wide and 3cms high.

I had trouble with closing the large rings with this thread and am thankful it did not break. It did flip the last half-stitch and I had to rectify it each time despite care and precaution while closing. After the first two rings I remembered Patty Dowden's Working with Large Rings tips and closed the ring in two phases (like in the dimpled yorkie) - https://tipsaroundthehome.blogspot.com/2015/03/experimenting-with-colours.html

Let's see what tomorrow brings - hopefully plenty of time to decide, tat, and complete for 15th August to celebrate #HarGharTiranga!

fumble fingers

Pin It now!

 I swear if you watch me do beaded tatting you will forget how to tat with beads! My fervent wish is that a beading friend sit beside me and help me use the tools and materials I have effectively and efficiently. I simply fumble my way through, taking a ginormous amount of time even for simple patterns. And nothing comes simpler than this earring pattern!

Remember I told you about receiving many gift patterns around ITD this year? This simple one-shuttle earring pattern is a special gift from Jill McLean! Here is my journey ....

1. My first trials with new metallic thread (Natvarlal brand) failed. The single thread broke soon after starting my 1st attempt. 

So I used 2 threads above, but while closing the ring, one thread broke. Had to be abandoned.

2. Played safe on my next trial, using size 20 metallic thread.  

My only variation was using 2 different coloured beads. The yellow ones (up beads) went around the hand on the ring loop, while the blue ones (down beads) were pulled from the shuttle. 

Stringing beads didn't require too many brain cells - load all of one colour, then all of the other!

TIP : One can work the small ring as a SSSR hiding the tail without any sewing! (Miranda pictorial ; Marilee video)

3. Friends urged me to use my silk threads. So here's one Opella silk skein (all 6 strands) along with faceted bicone crystals in 2 colours - the inner green are a tad smaller than the outer silver crystals. 

I used metallic silver thread to make jump rings for the 2 teardrops. Huh, they don't look too bad in the pic, but I had a tough time getting them into shape, especially doubled up. 

Here the large ring took patience while closing - had to slide the stitches to the left in batches till the ring finally closed. 

This time the small ring on top is a split ring, sewing in tails on either side after making an overhand tie. 

TIP : But there's a way to end on a SR without sewing, too.

4. How would it look if the size of beads was inverted? So, large black wooden beads on the inside and small seed beads (17/0) on the outside! 4 seed beads per wooden bead. 

This time I decided to make a mock ring and was going to make onion rings, but switched to a red Swarovski crystal surrounded by seed beads instead. Both used Floating Beads methods.

The black beads are strung through 5 strands of Anchor silk thread on shuttle1; and silver metallic thread with seed beads on shuttle2. 

My idea was to have the red colour show up in the stitches between the black beads. How wrong was I! Unless I used reverse (unflipped) stitches, the red is hidden. Felt like a fool, but didn't feel like undoing the first few stitches, so continued.

QUICK TIP : Tatting with Metallic thread 

This metallic thread is pretty much a wire with silver thread wrapped around it and it was difficult to get a flipped stitch, especially the first half stitch.... till I hit upon a little movement!

1. Floating beads at the start, and an open chain in progress which will be joined back into a mock ring using a lock join.

2. Making the 1st half stitch. The silk thread does not have enough strength to make the metallic thread flip. With any free finger/thumb, gently push the loop indicated by arrow ... push it upwards and it's a Flip!!!

[The inset shows how direct tatting would've worked.]

3. And there it is - the 1st hs. The 2nd half stitch poses no problem. 

And that's it for now. Other ideas percolating in my head will have to wait for another day.

Isn't it amazing how simple variations and combinations can create a range of effects?!

Design TIP : The size of the down/inner bead, besides the size of thread used, affects the size of the earring as is evident above. The up beads do not affect size of ring. 

The double layer of beads adds stability of shape and structure, besides the visual effect.

And this is such an easy but versatile pattern that one can make a pair for every dress!

Many many thanks, Jill, for your gracious, exciting, and enjoyable gift ...

made me push my beading boundaries 💖

Of long chains & large rings

Pin It now!

I keep telling myself that I will Not be distracted. Huh, as if that resolution lasts for long!

Yesterday I got this cute angel pattern in my mailbox & recently some experimentation on Mock rings held my curiosity. Of course I had to jump in ! You know the feeling, right ?!

Angel with Paisley Wings 

by Sheila Heneise    

On May 16^th, Georgia Seitz is revisiting this cute angel pattern as she some story to tell !

I took the opportunity to tat this minimalist, but happy angel.

This time I went with single shuttle & ball thread, in Anchor size 40 white.

Techniques I used : direct tatting, directional tatting, decorative picots, Join to Smooth Side (JSS), inward picot (held by pin), long picots, very small picots, turn work.

Size : approx. 1¾” x 1 ¼“

Instead of reversing work each time as instructed, I used direct tatting (reverse stitch) for many of the segments. It is a fairly quick & fun tat, but I could’ve done better with the chain shapes.

One can make the wings using Martha Ess' Folded Rings.

TIP : Switching from normal tatting to direct tatting (and vice versa) can create a distinctive pointed chain/tip at the turn. 

OOOOOOOOOOOOOO 

Large Ring Options

Each of the 4 large rings in the motif has been worked differently using the stitch-count given by Eliz. (links to respective posts & tips in the discussion below).

RING 1 : Normal Ring

Working large rings has become very comfortable ever since I came across Patty Dowden’s technique. I have my own version of it – looping the thread round the entire hand (all fingers) gives me lots of room & slack, without having to wind extra thread.

Conditions : stitches should not be tensioned too tightly ; 6-ply tightly twisted thread works best

RING 2 : Mock Ring with inward picot

Jane McLellan’s experiment with normal ring, self-closing mock ring (SCMR), & mock ring, led her to choose the latter for the large rings’ motif she was tatting. She used an inward picot (picot on the core thread), held in place by a pin/clip, at the start of a long chain which was then joined back to the picot to simulate a ring. She also used a SLT/overhand tie to change direction of chain for the ring. Instead of SLT, I switched shuttles.

TIP : SCMR is a ‘fancy’ Mock Ring (MR). The only difference is that the inward picot loop is drawn out & held on a finger, allowing the whole shuttle to pass through at the time of linking & closing. In MR, we make a normal picot join.

RING 3 : Mock Ring with scroll/overlapping effect

This was followed by Eliz Davis' mock ring where instead of an inward picot, she used a normal picot, tatted the long chain, curved it back into ring shape & linked it to the picot below as in stacked rings. She also shared the stitch-count which I used.

This was an interesting ‘twist’ not only in terms of visual effect, but also in terms of working it. In Jane’s MR, we continue to tat the chain & join to previous elements in clockwise direction, since the SLT or the switch shuttle made the directional change right at the beginning.

In Eliz’s MR, the chain is continued as normal, hence it is looped back in counterclockwise direction & joined to previous element accordingly !

TIP : Visually this is very similar to a Running Scroll in Elgiva Nicholl’s book . And one can choose the direction of overlap. The overlap in my trial is opposite to that of Eliz’s. Also, instead of a picot, one can use an under-over or alligator join.

UPDATE : Mock Ring pictorials and options in series of posts starting with .... https://tipsaroundthehome.blogspot.com/2018/05/mock-rings-1-under-and-over-join.html  

RING 4 : Folded Chain Mock Ring

I’ve used the folded chain many times, eg. in the Super 17 Butterfly. Would it simulate a ring ? At the point where ring has to start, make a very small picot and 2 SHS (2^nd half stitches). The chain folds immediately, leaving the picot protruding outward for joining at the end. I counted the 2SHS as 1DS (but it is optional). Continue with chain & join back at base to the picot.

I could’ve made the picot even smaller.

Factors that may determine choice :

• Thread colours & desired position in pattern
• Individual ease & comfort with particular method
• Whether working with single shuttle & ball or with 2 shuttles (The above motif can be tatted with a single shuttle & ball, irrespective of the method !)
• Thread characteristics
• Desired visual effect

OOOOOOOOOOOOOO  

Update

In the previous post, Set 1 of Common Threads has been renamed ‘Overhand Tie’ (instead of overhand knot) after a discussion on Craftree. Two ties in succession create a knot. A knot conjures up the image of something that has been tightened, whereas a tie is like a ‘half-knot’ with slack that can be loosened easily if required.

Related Posts : butterfly patterns

Common Threads