fumble fingers

Pin It now!

 I swear if you watch me do beaded tatting you will forget how to tat with beads! My fervent wish is that a beading friend sit beside me and help me use the tools and materials I have effectively and efficiently. I simply fumble my way through, taking a ginormous amount of time even for simple patterns. And nothing comes simpler than this earring pattern!

Remember I told you about receiving many gift patterns around ITD this year? This simple one-shuttle earring pattern is a special gift from Jill McLean! Here is my journey ....

1. My first trials with new metallic thread (Natvarlal brand) failed. The single thread broke soon after starting my 1st attempt. 

So I used 2 threads above, but while closing the ring, one thread broke. Had to be abandoned.

2. Played safe on my next trial, using size 20 metallic thread.  

My only variation was using 2 different coloured beads. The yellow ones (up beads) went around the hand on the ring loop, while the blue ones (down beads) were pulled from the shuttle. 

Stringing beads didn't require too many brain cells - load all of one colour, then all of the other!

TIP : One can work the small ring as a SSSR hiding the tail without any sewing! (Miranda pictorial ; Marilee video)

3. Friends urged me to use my silk threads. So here's one Opella silk skein (all 6 strands) along with faceted bicone crystals in 2 colours - the inner green are a tad smaller than the outer silver crystals. 

I used metallic silver thread to make jump rings for the 2 teardrops. Huh, they don't look too bad in the pic, but I had a tough time getting them into shape, especially doubled up. 

Here the large ring took patience while closing - had to slide the stitches to the left in batches till the ring finally closed. 

This time the small ring on top is a split ring, sewing in tails on either side after making an overhand tie. 

TIP : But there's a way to end on a SR without sewing, too.

4. How would it look if the size of beads was inverted? So, large black wooden beads on the inside and small seed beads (17/0) on the outside! 4 seed beads per wooden bead. 

This time I decided to make a mock ring and was going to make onion rings, but switched to a red Swarovski crystal surrounded by seed beads instead. Both used Floating Beads methods.

The black beads are strung through 5 strands of Anchor silk thread on shuttle1; and silver metallic thread with seed beads on shuttle2. 

My idea was to have the red colour show up in the stitches between the black beads. How wrong was I! Unless I used reverse (unflipped) stitches, the red is hidden. Felt like a fool, but didn't feel like undoing the first few stitches, so continued.

QUICK TIP : Tatting with Metallic thread 

This metallic thread is pretty much a wire with silver thread wrapped around it and it was difficult to get a flipped stitch, especially the first half stitch.... till I hit upon a little movement!

1. Floating beads at the start, and an open chain in progress which will be joined back into a mock ring using a lock join.

2. Making the 1st half stitch. The silk thread does not have enough strength to make the metallic thread flip. With any free finger/thumb, gently push the loop indicated by arrow ... push it upwards and it's a Flip!!!

[The inset shows how direct tatting would've worked.]

3. And there it is - the 1st hs. The 2nd half stitch poses no problem. 

And that's it for now. Other ideas percolating in my head will have to wait for another day.

Isn't it amazing how simple variations and combinations can create a range of effects?!

Design TIP : The size of the down/inner bead, besides the size of thread used, affects the size of the earring as is evident above. The up beads do not affect size of ring. 

The double layer of beads adds stability of shape and structure, besides the visual effect.

And this is such an easy but versatile pattern that one can make a pair for every dress!

Many many thanks, Jill, for your gracious, exciting, and enjoyable gift ...

made me push my beading boundaries 💖

using silk thread

Pin It now!

Melanie wished for some details on how to put silk threads to use, and this post is a short compilation of my projects showcasing some of the ways I've used them along with my thoughts/tips. But first step over to see the silk project she's working on here.

1. Embroidery on paper - 

So my very first project with silk thread, for which I specifically bought a spool, was for embroidery on greeting cards in 1986-87. These are some of the many I and my sis made together. Except for the towers on the left which used 2 strands, the rest all use only one thread.

2. Hand embroidery (single thread) - 

These next 3 are hand-embroidered on handkerchiefs, using only one thread. 

I tried to use the thread for a picot edge but unless the tension is very precise, the silk thread tends to break. I finally settled on coloured sewing thread for the edges.

I've posted details about this here. The sheen and colour choices are amazing! However, ironing needs to be done by placing a damp fabric over the embroidery. Otherwise the threads may singe and fray.

Another hanky where I used single silk thread. These are all old well-used hankies, hence the fraying is visible. For really long-lasting embroidery, I recommend Anchor embroidery thread/floss.

TIP: One tip when using silk for hand embroidery - Use short lengths. Long threads tend to unravel or knot. More importantly, the thread frays due to friction with the needle eye. My solution is to keep moving the needle along the thread so that it does not cut through the thread at one point. It works really well, as in the next project ... 

3. Hand embroidery (multiple threads) -

Here I used 3 strands of silk (1 from each spool - yes, I bought several in the same colour, LOL). Working with multiple strands of silk is not an easy task since unlike embroidery thread, these are smooth and do not adhere together. But where there's a will, there's a way!

This is also the go-to thread for another form of hand embroidery - Phulkari, a traditional style with geometric designs that fills up the entire fabric from the front! The Punjabis use brilliant colours to fill up the spaces. I am not much into symmetrical patterns, hence have never tried this stitch/pattern.

4. Machine embroidery -

Above is my sole venture into machine embroidery. I deliberately went freeform with the neck coz I could not manage to 'stay within the lines' - my design choice, haha. It is for my MIL's nightie way back.

It took a lot of manoeuvring to get the tension right and avoid breaking thread midways. I managed successfully for the most part, but not always.

This is nothing compared to what my Mom could do, including using a horizontal needle to couch over. It was mesmerising to watch how she moved the hoop on the machine with one hand, while turning the hand wheel with the other, phew!

5. Tatting - 

Finally, tatting with silk. Above is my first venture with single silk thread tatting back in 2014. The sheen is not very clear here. I simply let my shuttles take the lead, belting out a freeform braid. As you can see, it has rings, chains, split rings, onion rings, floating rings.

I found it surprisingly easy to tat, except for the eye strain. Thread moves smoothly and surely, rings close neatly. There wasn't a single break throughout! And see how dainty it is.

TIP: Before closing the ring, if you post the other shuttle through the open ring, it creates an overlapping and enclosed effect!!!!

See how the threads seem to emerge from within the topmost ring? It happened when I posted the other shuttle through the ring before closing it. And the chain seems to emerge through the ring!

The flaws in tatting are purely my lack of skill at the time.

6. Tassels - 

Then of course, the common use for silk threads, as advertised when selling, is for tassels, as in the above bookmark. Long tassel earrings are a rage at present.

Silk thread brands in my stash - 

I was asked about the colour fastness & brands of these silk threads. Above are the 3 brands where the tags/sleeves are still intact. Below are each with clearer details ....

I like this Coats' Doli brand the best. The spool itself is tightly wound, as is the thread. I prefer this for machine embroidery.

Besto is another I have several spools of. Both the thread and the spool are not as tightly wound as Coats. But colours are gorgeous - lots of pastel shades.

Codak is from my MIL's leftover stash. I have 3 or 4 colours in this brand, which appears similar to Besto, except that the spool is smaller. No thread details on the sleeve, except for colour fastness.

I have a few twisted strands of silk thread as well, but forgot to take a pic. Maybe I'll add a pic tomorrow. So do check in tomorrow ....

UPDATE - Here's my complete silk thread stash -

The 5 wooden spools are vintage pure silk threads (at least 60-70 years old) as I'd mentioned in my earlier post. 

On the left are some skeins of Opella brand silk threads. Some have been used, others are still intact after decades! The tag says 'Fast to Bleach' (does that mean it is bleach-proof?), and it has the shade number as well, unlike the other spools.

UPDATE - This is what Kathleen Minniti says in her comment below - NO CHEMICAL BLEACH EVER ON SILK! It will literally dissolve silk to nothing. The label may be referring to fading from sunlight; laying garments out in the sun to "bleach" has been a time-honored method of lightening cotton and linen fabrics.

On the cards below Opella, are leftover lengths from projects.

And under that is my new metallic thread stash that I will show you once I've tatted with it!

taming the threads

Pin It now!

 Last month I bought a set of metallic threads and needed a good storage place for the 22 spools. My silk thread box had usable space. A while back I had placed the spools vertically in colour zones, but over time the silk thread ends had unspun and tangled a bit. It happened since most of the used spools didn't have their brand sleeves. 

It called for better organisation and this simple solution hit me - 

Simply cut narrow strips of paper, roll it around each spool, and tape the ends! I could've inked in the details, if I had (or needed) them.

I could've done a better job, but the high point was that I did not have to get up at all - everything was within hand's reach : blank paper, scissors, sellotape, and as I reeled in the ends for each spool, it got "tagged"!

The horizontal spools are only posing for the photograph! After the smiling, they were sent back to standing position.

I still have Mom's leftover pure silk threads from when she used to do machine embroidery some 50-70 years back. A couple of them are visible on the right (wooden spools).

Some left-over spools are from my Mother-in-law (eg. the brown one at bottom center & pink at top left).

The rest of the threads are rayon silk. I used them more for embroidered greeting cards.... made and sent lots of them, and still have a stash left. Some day I'll get around to taking pics and sharing.

tassel tips n tricks

Pin It now!

Over the years I’ve assimilated a few tips and tricks for making the perfect tassel – umm, aspiring to. I was simply going to share the link to this latest trick, except that the link does not open now without membership to the Japanese site/platform. Despite a fairly thorough search I couldn’t find a single video or pin where this trick was used, hence I made a quick collage.

With tassel earrings raking up quite a storm, it is a simple and neat trick to have in one's kitty. 

1. Cut a length of paper and roll it over the tassel. The length of the paper cylinder should be the desired length of tassel.
2. It is important that the cylinder is snugged up to the base of the tassel if one wants identical lengths as in earrings.
3. Then snip close to and along the lower edge of paper. Remove paper, and voilà, we have a neatly trimmed, perfect tassel each and every time!
4. This tip was shown in stepwise detail, by sekiraralace here to make red tassel earrings. 

Some more tassel-making links and tips

• Rachael Mohler’s video. 

• Silk thread tassel earrings using fork – uppunutihome’s video 
• Midway through the above video, notice how the threads curl and spread when she puts the scissors inside the tassel and cuts? Judith Connors had once highlighted this point in Craftree (sorry, don’t have a link) – Always cut across, never through the threads. This keeps the threads together and it really works.

There are loads more youtube videos, all pretty similar.

• When I shared Stephanie Wilson’s tip about using scrap threads, she sent me another tip – she adds a few strands of metallic scrap threads to the tassel!!!

• And lastly my own tips for a frayed tassel  

UPDATE (Apr 24, 2019): Patricia Lynn-Cobb has an excellent tutorial for a Great Tassel. Download the pdf from this post.

• DIY satin ribbon tassels video  

Do you have a tassel tip or trick or tutorial to share? I would love to add it to this list which will be on the Tatting Resources tab above. Waiting eagerly to hear from you …