veg patch game

Pin It now!

Game of the month in the Endrucks 1920 Project FB group this month is to tat either of two pumpkin patterns derived from pattern #25 - one is flat (Julie Myers) the other 3D (Daniella Galli). Obviously I would've liked to tat both, but went for the quicker option. 

Julie Myers' adaptation of E25 Extract Me Pumpkin pattern PDF for #VegPatchEndrucks Aug2024 - https://drive.google.com/file/d/1WKxGqijegF911nOvbmNjUuPVOQkHNZyF/view . Incidentally she derived this during our Sep 2022 game - ExtractMeEndrucks (as did Daniella!). Hmmm, one month shy of exactly two years!

My version reflects the type of pumpkin I enjoy eating during summer months - the green pumpkin (see next image). It is not fully ripe, has a mottled green skin and pale yellow pulp with a few scattered seeds. I visualized her pattern as a cross section of the whole pumpkin - the rings as white seeds, the pale yellow pulp, and a green skin. 

https://images.app.goo.gl/qpWbJWvj4BTVDEU5A

This is the only good image I could find which is identical to what I buy. Most images have an orangish pulp and green or brownish skin. Perhaps next season I'll remember to take a pic when I buy it.

I make the sabzi (kaddu/sitaphal) in summers till raw mango is available. Cut into pieces (one can keep the skin on or peel it), also dice some raw mango into small cubes, mix in spices, temper with whole fenugreek seeds and asafoetida, cover with plate and microwave for 3 minutes, stir and zap for another minute or so as required! It is such a quick-cooking dish and tastes wonderful with roti, puri, paratha, rice. 

I have a traumatic experience with the kaddu raita, though! Mummy once made it and it was horrible. But she insisted we finish it and I shudder ever since, despite enjoying various kinds of raw or cooked/grated veggies in beaten curd, LOL.

Wanted to use beads for seeds, and had even selected the pearls. Then decided to tat in 3 colours. 

NOTES - 

• In Gopi size 40 threads, the main body is 4.5cms high and 4.2 cms wide. 
• I used a single shuttle wound with the white thread. Yellow and green remained on their respective ball. 
• Started with false ctm - pulled out a short length of yellow, and finger-tatted the first chain, leaving a starter picot. Then continued with white shuttle, hiding & snipping off the extra yellow length.
• Tatted continuously, all clockwise. I didn't feel the need to turn work after every round. Especially since I was using the one shuttle and the colours positioned themselves as needed. Just left a very small picot at the start of each round to join back to.

• Treble tatting on the outermost round. While not strictly realistic since the actual peel is thin, but tds is fun and gives a nice finish and texture I hope. Would look good for a floral effect!
• I didn't count the tds, eye-balling the length of each segment by placing it along the corresponding chain segment below it. 
• TIP: After the required tds, I worked in 2ds, lock join, 1ds, p, 1ds. Now join simultaneously through both the hidden picot of last tds and the picot of new segment, and continue this as the 1st tds of new segment. Repeat at each join. This gives a nice, clean dip (You can see the difference on the join between 2nd and 3rd chains on the right side. The dip is not pronounced because I experimented without the picot, joining directly). Another advantage is that there is no 'gap' at the base of the join. I think it came off nicely.

• The stem encapsulates all the tails and since I had used leftover thread, I simply ended with the long tendril, without extending the stem further. 
• I had intended to add leaves, but one of our participants has already done a stellar job of it! Perhaps I will still tat a leaf or two from the same 2022 game - this would act as an incentive to share the E25 palm leaf pattern which inspired Elisabeth's Multifaceted leaves. See how the branches keep multiplying?!

I enjoyed tatting this piece despite the somewhat unorthodox colours which don't immediately identify it as a pumpkin, and hope that soon I'll get a chance to tat Daniela's 3D version, too. 

🌿🌿🌿🎃🎃🎃🌿🌿🌿

UPDATE: https://tipsaroundthehome.blogspot.com/2024/08/lollygagging-or-not.html

🌿🌿🌿🎃🎃🎃🌿🌿🌿

We do have a few other veggies in our Endrucksian garden patch as inspiration, including another 3D pumpkin (from E12) by Krystyna Mura. Check them out in the Foliage directory - https://docs.google.com/document/d/1EIgPKHH9V2Dg4gDZNefVfSVNRZQC6LbSfhiaWA_s-G8/view  

Many many thanks to Julie and Daniela for graciously sharing their patterns 

and to Ninetta for hosting the game! 

bingo, found it

Pin It now!

 My tatting-related activities are so scattered. And I feel quite scatter-brained. Wonder which came first, hmmm. Over the past several months I have been tatting samplers for the Glossary. Since it is progressing in sporadic bursts, I tend to either forget I've tatted it or misplace it. The pile-up does not help at all, neither does the various steps involved in saving and processing if not done sequentially and soon.

However I had a lucky breakthrough! Finally found the sneaky little Double Pearl chain sampler, whew. Incidentally, the PICOT Bingo game has one box for this technique, which is why I am sharing it here. 

My initial objective was to tat a short sample. However, the rhythm became quite addictive and I enjoyably continued till one of the threads ran out. What was meant as a short chain turned into a necklace.

Pearl Tatting is the double-sided technique with picots and stitches facing both sides. We are more familiar with the Single Pearl, worked with 3 threads instead of 2 for chains and it's counterpart the Maltese Ring worked with 2 threads instead of one. Pearl is the vintage term for picots. There are a few tutorials listed under Chains 🠆 Pearl Tatting, here. Mlle Riego wrote a book dedicated to this technique in 1867! 

Double Pearl tatting/chain, consequently, is an extended single pearl using extra auxiliary threads - a total of 5 threads for chains which tend to be straight.  

Double Pearl tatting requires 5 shuttles (or at least 3 or 4 shuttles + 2 or 1 ball, respectively) and encapsulation. Numerous permutations and combinations are possible, but I stuck to the basics.

You can change

• the number of colours and their relative position,
• the number and size of picots,
• the addition of decorative elements thrown off the chain,
• the thickness of threads,
• the stitches used (double and reverse stitches) and thence the number of shuttles used,
• embellishment with beads, etc., and so on.

● We can even have decorative chains instead of the long bare thread picots! For instance, dot picot string, bullion knots, JRs, Josephine knots, scallops, etc. 

On the left part in above image, you can see the thrown Josephine rings instead of the small picots.

TIP: If you wish to add such elements on each segment, ensure you have 5 shuttles.

I deliberately used 4 different colours. But imagine the confusion one can create if working with the same colour throughout! Even experienced tatters might find it difficult to identify how it was done, LOL.

I then continued as before, enjoying the rhythm. Josephine rings tend to break that working rhythm.

Threads used - Anchor mercerized cotton size 20 (equivalent to Lizbeth size 10) in 5 colours 

TIP: Only 4 colours are visible. The core thread can be of same thickness or thicker than the outer threads for a stiff cord. The core thread can also be made visible by simply bringing it forward, or by using Repositioning methods such as SLT, etc.

Picot gauge - 2 cms

TIP: It was easier to hold the gauge horizontally while measuring.

Starting the chain was tricky. I knotted the 5 threads together, but leaving the right length of bare thread took some trials.

Also, initially I made mistakes in maintaining a consistent overlap between threads. However, once I understood where the thread of last segment should be held while tatting the new segment, it became smooth sailing and addictive. 

TIP: Immediately after tatting a segment, I would place the shuttle to my left at the front of the work. Thus, when its turn came again, the picot overlapped from the front.

Directional or FS/BS tatting was maintained throughout. I didn't block the finished piece, except for shaping with fingers since I wanted to keep the gracefulness of the sinusoidal arches intact. 

I could've added more picots, including graduated picots, in each segment; or embellished with beads. However this was a relaxing, enjoyable tat, and I wasn't in a very adventurous frame of mind.

Since the core thread is of same thickness, it was easy to curve the straight chain. And it had become long enough to become a necklace instead of a bracelet, LOL.

TIP : Another way to ensure curvature is to shorten the picots on one side. 

I do wish I had added a few highlights such as beads and findings to finish off the 'necklace' properly. And one can use metallic threads for stiffness. Otherwise one might need to stiffen the piece for the picots to hold their shape when worn as a necklace or bracelet. So, I hope Natalie forgives me the lethargy.

Submitting this for two blocks in the PICOT Bingo - 

Double Pearl Chain, and 

Tat a Necklace.

And 💥Bingo💥! I have completed my first horizontal strikethrough! The middle row consisting of Tat a Necklace; Add Beads; Free Space; Graduated Picots; Catherine Wheel Join.

smiling together

Pin It now!

Ninetta recently surprised me with a thoughtful and gorgeous gift on my birthday. She sent me the pattern for her cute little flowers which she named after my moniker Muskaan which means Smile! What an honour! This sweet Hiding Lady knows how to impress and she shared the Smiling Flowers (rose) pattern here -- https://ninettacaruso.blogspot.com/2024/07/smiling-flowers.html 

This is my adapted application into a rakhi/bracelet choosing to represent our tricolour (tiranga) Indian flag. This month we celebrate our Independence Day and Raksha Bandhan just days apart.

Saffron Marigold impression - Marigolds are considered pure and auspicious flowers and you will find them during any Hindu festival or ceremony.

It largely follows Ninetta's instructions except for the petals on the 2nd row where I used graduated treble tatting with 4 wraps. 

(For graduated tds, refer - https://tipsaroundthehome.blogspot.com/2018/07/multiples.html)

 

White Lotus impression - Lotus is our national flower and also symbolizes purity and peace. 

Although not very clear in the pics, the 2nd round petals have distinctly graduated tds with a pointed tip. Instead of 5tds, there are 7 tds with 1tds(1,3), 1tds(1,4), 1tds(1,5), 1tds(2,6), and ditto on the other side with 5, 4, 3 wraps.   

(For notations, refer - https://tipsaroundthehome.blogspot.com/2020/05/double-trouble-motif.html)

Blue Center - Clear blue bicone faceted crystals at the center for the Ashok Chakra in the center of our flag. I didn't have any blue bead larger than this.

Tempted to tat one more round of petals for the marigold but I desisted for two reasons - one, I ran out of thread; two, how can a marigold be larger than a lotus, LOL.

( Find treble tatting tutorial/video links here - https://ninettacaruso.blogspot.com/p/blog-page_95.html and on my Tatting Resources page.)

Green Leaves - The third colour of our tricolour is green which symbolizes prosperity, vitality.

Ninetta used the tds rings as calyx for her flowers. I used it to make leaves with more tds and some graduation.

Tatted continuously with a single shuttle, the leaf clusters are connected with a ring braid with pulled loop joins (leave bare thread at the back of the ring and make a lock join to the picot). This will act like a frame to secure the flowers.

Assembled together and attached to a doubled string of beads (12 on one side, 14 on the other for that 'gap'). All sewn in.

The beads are actually silver - like silver lining clouds against a blue sky.

So this is my Rakhi/Bracelet 2024 from Ninetta's beautiful pattern! Over the years, I have often used the tricolour to celebrate August 15th (including Har Ghar Tiranga with the 75 year old coin), and have also shared some of my tatted rakhis. 

And making short work, I am submitting this for Natalie Rogers' PICOT Bingo game, crossing off three boxes --- Treble Tatting Stitch , Add Beads , and Tat a Bracelet! 

Oh, and I used Anchor Pearl Cotton, size 8, throughout. 

I find the treble tatting stitch quite addictive! I honestly didn't want to stop tatting. If it weren't for the thread and time running out, I would've continued!

In my haste, though I forgot to add a clasp to the beaded ends!

Small 3D flowers always remind me of Carollyn Brown who had made it her personal goal to tat one floral sprig every month for a year! She always managed to amaze me. You can find her blog here - https://tennbrown.blogspot.com/2020/11/

And adding to the all-encompassing nature of this post, this rakhi/bracelet in flag colours is my August submission to splocik's Small Decorations game. Please do head over to the July gallery to check out the talented and diverse submissions compiled there - https://splocik2.blogspot.com/2024/08/male-dekoracje-2024-galeria-lipcowa.html

Thank you my dear partner in crime, Ninetta, for the honour and friendship you bestowed on me. It is precious! Keep smiling, always :-)))