dizzying no more

Pin It now!

.... thanks to Ninetta who always delivers with her engineering brain! I was trying out Mark Myer's (Tatman) Dizzy Double Stitch and simply could not get the 1st half-stitch right. Sought Ninetta's help and she surprised me with a video showing the process! I based my pictorial on this video. 

'Tatman' Mark Myer's DIZZY  DOUBLE  STITCH

Tatman Mark Myer's diagrams (July 2009) - https://web.archive.org/web/20090703064724/http://tatmantats.wordpress.com:80/dizzy-double-stitch-instructions/ 

Ninetta Caruso's video (Feb 2025) - https://drive.google.com/file/d/1U2SwGQGFf-zbn24ANMIxNmotW8l7-uIe/view

Muskaan's pictorial PDF (Feb 2025) -https://drive.google.com/file/d/1WymeZxilPxO159R2kz0mX19O-3LUBTjz/view

This stitch can be considered a form of padding the stitch where only the knotting thread has extra bulk or padding while the core thread remains unaffected. See Padded Double Stitch - http://tipsaroundthehome.blogspot.com/2014/05/tatting-experimenting-with-stitch.html
The extra twist in the thread creates a nice texture and height and tries to recreate a crochet stitch. We now know of another tatting stitch that mimics crochet - the Treble Tatting Stitch!

💟💟💟💟💟

Above is my first trial while following Ninetta's video. Notice the extremely thick cord I used, LOL!

💟💟💟💟💟

While I am sharing all pics for the pictorial here, for more details, please refer to the links given above.

 

1. Working in two colours, blue in shuttle and yellow ball. I started by making a small ring followed by a chain with a few double stitches (DS) and 3 dizzy DS. Here’s how the latter is done …
2. 1st half-stitch: Make a loop with the ball thread keeping it behind the shuttle thread. Hold the base of the loop in a pinch along with the shuttle thread (black arrow).The loop is held taut around your other finger- middle or index finger, whichever you use (red arrow).

TIP: It is very important to know where to insert the shuttle and which thread to pull while snugging.

 

3. Bring the shuttle above the loop and
4. pass it through the loop from back to front, from the lower/right part that lies behind your finger ...

 

5. and pass the shuttle from behind the core thread (between loop and shuttle thread).
6. Transfer/flip and remove all slack by pulling on the upper/left part of the loop. Notice there is a twist in the half-stitch.

 

7. 1st half-stitch of the dizzy DS is made and neatly snugged.
TIP: For the twist to show, keep the stitch a bit loose. Pulling on the ball thread too much will hide the ‘weaving’ effect. 
8. 2nd half-stitch: Start a loop just like for the 1st half-stitch and hold in pinch. Refer #2.

 

9. Bring the shuttle up keeping the thread in front and
10. pass it through the loop from front to back at the lower/right part of loop and above the core thread between the space between loop and shuttle thread.

 

11. Transfer or flip the stitch and remove all slack. Again, keep the stitch a bit loose for the twist to show. 
12. 2nd half-stitch made and neatly snugged.
One Dizzy Double Stitch made. Repeat the steps for as many stitches as needed.

A chain with dizzy DS. Notice how the stitch gets better when I kept the knotting/ball thread 'loose'.

A dizzy DS chain joined back for a mock ring.

TIPS / NOTES:

Tatted by Anita Barry (comparing tightly snugged and loose stitches)

• The samples above clearly show the reason why we need to keep the dizzy DS a bit loose.
• Ninetta 'cracked' it because Mark pointed out the similarity with working the 2nd side of a split ring. Perhaps this can be kept in mind.
• It is a good idea to leave a small picot before the first stitch and after the last stitch to compensate for the extra height (Ninetta).
• Picots can be made in the normal way by leaving space in the ball thread.
• For a straight chain, use a thicker core thread. 

💟💟💟💟💟

  

Initially I thought we couldn't use the stitch in a ring. However, when Ninetta said we can, I gave it a try and it worked! However, it turns out that I approached it a bit differently, reminiscent of a Loop Tatted Ring! Meanwhile Ninetta made another video for a ring, following Mark’s instructions. 

Ninetta's video for Dizzy Double Stitch in a Ring - https://drive.google.com/file/d/1WhDgd9w1U7PZ9buVq_c8r8FA0-VIU5gn/view

So here's my slight variation .... 

I started a ring with 1DS. And above is how I worked the dizzy DS, just like in the chain. I divided the ring loop into two and held the base of loop and shuttle thread in a pinch. On the lower/right part of the top loop, I followed the steps for each half-stitch as shown in the chain pictorial. 

💟💟💟💟💟

Jane Eborall (2009) used the 2nd half-stitch to make textured Josephine Rings that are denser. Josephine Ring (alternative way) – http://janeeborall.freeservers.com/TipsAssorted.html

I had used this in the buds for my Poppy pattern back in 2014 -https://tipsaroundthehome.blogspot.com/2014/09/tatting-pattern-tiny-heart-poppy-part-2.html

Karen Cabrera (2010/11) shows a slightly different method of working the stitches which can be considered a variation of the original. Lesson 37 - http://www.youtube.com/watch?v=CUtHpsIIknE
Ninetta Caruso (2025) compares Mark’s and Karen’s stitch in this video - 
https://drive.google.com/file/d/1UGlvqk4mPiWz9BEQ4AoKVnkxhQw72Blt/view

💟💟💟💟💟

Download PDF - https://drive.google.com/file/d/1WymeZxilPxO159R2kz0mX19O-3LUBTjz/view

I hope you like this revisit to a 'forgotten' stitch and will use it to decorate some of your future tatted lace. It's a fun and quick tat once you get a hang of it! You can find tutorial links for all terms mentioned here - https://tipsaroundthehome.blogspot.com/p/tatting-resources.html

Many many many thanks to all mentioned above!

association

Pin It now!

 When we come across a new tatting term/technique, always try to place it within the larger set of techniques you already know. You will be surprised to find that you might already know the technique or at least parts of it. And then learning becomes easier, smoother, and associative.

One of the first messages waiting for me yesterday morning was about the Loop Tatted Ring (LTR) in the Christmas Star pattern by Krystyna Mura, an E31 adaptation. [pdf: https://drive.google.com/file/d/1fz0Hd9jgGnS_qWKayw4UX2Ikr-mp-npb/view]. It starts with a LTR over a bead. 

Despite the video and pictorial links suggested in the pdf itself, Ulrike found it difficult to grasp. I, too, watched a few videos, consulted a few tutorials and found that it could indeed be difficult to grasp, despite the resources themselves being good.  For one, they were all about a LTR on a ring which meant there are too many loops to consider, keep track of, and can become confusing.

That got me thinking and here's how I went about it. Deconstruct the LTR and you will find the basic concept, or at least some steps, is something you might've done before.

Step 1. Can you finger-tat?

Step 2. Have you tatted a single shuttle split ring (SSSR) Mathew Takeda style?

If the answer to both these questions is YES, then you are well on your way to tatting a Loop Tatted Ring! 

Very soon, she came back with her SSSR braid , having consulted a few resources listed in my Resources page [https://tipsaroundthehome.blogspot.com/p/tatting-resources.html]

Step 3. Now tat an entire ring using only the finger-tatting method. After all finger tatting with a loop employed for part of the segment of a SSSR is exactly what you do in LTR, but for the entire ring! 

And by jove, she got it! All within a few hours.

Step 4. Now we can tat the LTR over a bead easily as shown in several tutorials. 

I had written the entire post yesterday but then thought a limited/specific pictorial would help other tatters facing a similar issue, to work this lovely Star pattern too. Hence today I created a stepwise how-to for Rounds 1 & 2 of the pattern. I also took the time to read Miranda's post and pictorial again after several years and discovered the similarities of association! She also gives a nice history of this technique. I apologise for the unintentional repetition. Unfortunately Sabina Madden's site is down though she is trying to find another server to reinstall paradisetreasures.com.

LOOP TATTED RING for E31 STAR - pictorial pdf - https://drive.google.com/file/d/19q6JKdOyACqh8oz-Z0vzHgh-YCIZ5xBd/view

Now a Loop Tatted Ring or LTR is not limited to a LTR on Ring (LTROR). It can be used in several different ways, including on a chain as a thrown ring [https://tipsaroundthehome.blogspot.com/2021/08/thrown-floating-and-8-rings.html pages 7-8 in the pdf] or after a chain. 

Here it is used as a central ring. We could've used a normal ring or a mock ring. But with both methods, we would not have been able to seamlessly add the bead through both threads to resemble the bead on a picot. LTR allows us the freedom to work continuously with the bead. In a lot of circumstances LTR allows us to tat something that would normally require a 2nd shuttle.

Related Posts -
https://tipsaroundthehome.blogspot.com/2016/07/refresher.html

https://tipsaroundthehome.blogspot.com/2016/07/the-hedgehog-turns.html

thrown, floating and 8 rings

Pin It now!

Please note that the post and pdf have been updated on 30th August 2021. In case you already downloaded the pdf, kindly click on the link to refresh the document.

Tatting with an international community throws up interesting facts and ideas. All patterns in Endrucks' (1920) book use 2 shuttles and has plenty of rings made by switching the shuttle in hand - you guessed it - thrown rings! However, as Ninetta pointed out, a lot of Italian tatters have mastered the art of tatting with a single shuttle and ball, and adapting any pattern to suit this. It got me thinking about all the various ways in which we throw off a ring and here is the result of that exploration/stream of thought.

Thrown Ring Methods - a Ready Reckoner. click this link to download the complete document - https://drive.google.com/file/d/1PhXhtq9K-WiUbys0dwwZuOIat10hGlB0/view which contains pictorials for each method as well as patterns to practice. Included at the end is a list of Needle tatting resources. 

For several of the patterns, despite having a pdf, I had to give the link to the blog post because the pdf link just wouldn't work the moment I converted this doc into a pdf. Probably some formatting glitch.

 

Following is a limited glimpse into each method. 

Gapsosis - A frequently asked question is how to avoid any bare thread/gap between the chain and the thrown ring. Above is an old pictorial I had done in response to this very question, where we have a trefoil instead of a single ring thrown off the chain - https://tipsaroundthehome.blogspot.com/2017/05/squirreling-away-gapsosis.html. 

1. Using 2 shuttles. I prefer this method except when I want to create a point in the chain where the ring is.

A thrown ring does not necessarily have to be floating above a chain or ring! It can lie above a join, between 2 chains, and can also face inwards.....

While this 8-ring appearance may not use the term thrown ring, the blue ring is made exactly according to any of the TR methods (in above case, with 2nd shuttle). 

Several other effects can be seen in the above model. Can you identify the thrown ring(s) in each?

NOTE: Although not shown in the pictorials, the pink ring need not be alone. We can have 2,3,or more rings below, with 1 or more TRs above!

All the rest of the methods are made with one shuttle and ball. Compare the colour of the TR and the chain curvature between each method. It is very important that chain stitches are snugged properly before attempting the TR.

2.A. Flipped-Up ring is simply a normal ring that is turned upwards before continuing with the chain.

2.B. Since I didn't like the way it sat, I tweaked it by stabilising and centering the TR with on overhand tie and keeping the ball in front of the work.

3. Loop Tatted Ring can be used to throw off a ring as well.

4. We all know that the Self-Closing Mock Ring is often used to deliberately create a pointed chain - whether it is a 1ds SCMR or a larger thrown ring.

Direct Tatting. In certain cases, it is easy direct tat a chain and throw off a ring, using single shuttle and ball. Tatting will move from right to left, but the shuttle will be in position to make a thrown ring.

Even if the shuttle is not in position, it can be brought to where we need it, by the following 2 methods -

5.A. Twist Work - I start by making an unflipped half-stitch but instead of snugging. I pull the shuttle upwards (or downwards, if required) such that the threads now switch position and I have the shuttle where I need it. I had explained it here to switch threads after a lock join - 

 https://drive.google.com/file/d/1nRj_48VHK2LjhcxdQnirXBVweKO6h2ow/view 

5.B. Shoe Lace Trick - we all know this, but I avoid it and prefer other repositioning methods, including twist work. Jon Yusoff has explained this method very nicely here (wish I could get my SLT to behave so well!) - https://tatsaway.blogspot.com/2010/05/sometimes-you-dont-need-two-shuttles.html  

6. Changing Course - When another row/round follows the one with thrown rings, one can choose to shift the rings to the next row/round and make them normal rings. Obviously the direction of the rings will change, and sometimes it may cause ruffling/cupping/distortion. However, it worked fine in the above version - those purple rings were supposed to be thrown rings from the previous round, but I wanted this colour here, hence.... https://tipsaroundthehome.blogspot.com/2019/06/valley-of-flowers.html 

I tatted this twice! My intention was merely to showcase the different effects when using each of the methods (lower scroll). But then somebody asked whether I had a tutorial actually showing how to do a thrown SCMR. So, I started over, taking stepwise pics for each method. 

And now I'm calling it a Ready Reckoner (RR), because as far as possible, I have included everything we'd want to know about Thrown or Floating Rings. I would love to get your feedback on this format and exercise. I already have another RR on the way that was started in July in response to a friend's request for help. 

Click to download complete pdf - https://drive.google.com/file/d/1PhXhtq9K-WiUbys0dwwZuOIat10hGlB0/view