Showing posts with label picot gauge. Show all posts
Showing posts with label picot gauge. Show all posts

Tuesday, 28 July 2020

picoted Josephines

Pin It now!
Oh, my poor head – it is filled up with so much tatting-related stuff that my memory bank is full! No RAM, no way to access my over-full storage capacity, despite frequent rebooting, sigh! Turns out I already used the tufted rings in the Icy Rivulet Snowflakes last year - https://tipsaroundthehome.blogspot.com/2019/11/frozen-or-flowing.html. Barbara Slodka had first shared the video link (can't find the exact thread, but earlier than this - https://m.facebook.com/groups/752452334871921?view=permalink&id=2521882034595600 ; and the recent discussion - https://m.facebook.com/groups/752452334871921?view=permalink&id=3082763385174126&_rdr )

I seem to be going round in circles. Like I mentioned in the previous post (https://tipsaroundthehome.blogspot.com/2020/07/applying-techniques-rakhi.html), some question either in facebook or privately, set me on the path to compare various picot formations in Josephine Rings (JR) or Josephine Knots (JK) back in Oct-Nov 2019. 
But let’s move logically ….

Picots in Josephine Rings
A study of 4 methods
For each style in this study -  

1. Regular or Interlocking Picots
( https://youtu.be/V7XbtXhpN-4 )
Picots made normally (with or without a gauge) after every half-stitch.
       JR: 1ds, (p, 1hs)x14, p, 1ds.
Notice how the picots split apart as they get longer. The long picots are termed Interlocking Picots.

2. Mrs Mee Picots
( http://www.youtube.com/watch?v=qNW4CyGWzQA )
Picots made normally (with or without gauge) after every 2 half-stitches. 
  Make the picot followed by a half-stitch, and repeat the half-stitch (pic below).
      JR: 1ds, (p, 2hs)x14, p, 1ds.
This results in a larger ring, but with more stable but ‘independent’ picots and a larger center space. There is a tendency for the picots to twist decoratively if they are longer than 10mm.

3. Tuft Picots 
This requires a picot gauge through the 'leg' or loop of each half-stitch. The gauge may be placed above core thread (Nadezhda's method) or below the core thread (Ninetta's method). The beauty lies around the periphery where picots seem to be interlaced.
What Actually happens, is that the stitch itself becomes a picot! The gauge 'pushes up' the belt or horizontal bar of each stitch to lie on the outside instead of at the base of a picot as normally happens. 
The above rings have 20 picots of 5mm in size 8 perle cotton. 

Nadezhda Malysheva method - gauge above core thread
( https://youtu.be/HFCimyOpoXI March 2018)
Hold the gauge above core thread as usual. But look closely – the gauge is ‘inserted’ through the open ‘leg’ or loop of the stitch rather than the main arch of hs as in #1 and #2.
      JR: 1ds, (p, 1hs)x14, p, 1ds.
Notice the outer edge of the picots – they appear interlaced or interwoven, creating a neat trim around the periphery. It almost appears as if the stitches are made loosely - which they are, in a sense. But the 10mm picots split apart as in #1.

Ninetta Caruso method - gauge below core thread
( https://youtu.be/1uTtSE8ZUJY  Aug 2017)
Hold the gauge Below the core thread, but inserted through the ‘leg’ or loop of the stitch instead of the arch. 
      JR: 1ds, (p, 1hs)x14, p, 1ds.       
When the ring is closed, both Nadezhda’s and Ninetta’s rings turn out to be The Same! However, since the former does not have a name, and it was Ninetta who created it before, I think it is proper to term them both Tuft Picots. The rings can be called Tufted Rings.

My Observations and Thoughts -
  • Of the 4 methods, only Mrs Mee’s picots can be used for joining – they remain stable due to the extra hs between picots; the other 3 are merely decorative. They form a broader JR and a larger number of picots is more visually pleasing.
  • I find that using perle cotton creates a better tufted ring as seen in the rakhi I posted earlier.
  • As seen, 5mm picots give the best result. As the picots increase in length, they tend to split apart and twist. It makes sense, because the belt/bar of the stitch no longer has any support and slides back!
  • It is important to factor in the thread size to get the desired result.
  • It will be interesting to see the effect with graduated picots! And beads.

Tuesday, 21 August 2018

The picot stands tall

Pin It now!
Many of us ‘eye-ball’ the picot. When precision is needed as in case of graduated, double/triple, interlocking/interwoven, central and tuft picots or in tatted hairpin lace, a gauge is required. Some ink/tattoo dots on their finger! I merely measure and cut some cardstock to use as a homemade gauge. To me, vertical meant looping the picot thread around the gauge, while horizontal meant laying the picot thread flat along the measuring side. 

But Robin pointed out that there are different interpretations (see comments) and it led to a lot of research ending in this article : Measuring the Picot.
I will use 2 images sent by her to illustrate how some tutorials/resources differ in their approach & terminology. One set speaks of how to hold the rectangular gauge, while the other talks about how the picot thread lies (in relation to core thread or the gauge) when measuring. 

 
            In A, the picot gauge is held horizontally, but the picot thread is vertical.
In B, the gauge is held vertically, but picot thread is horizontal.
But notice that the core thread remains the same throughout – horizontal!
Core thread is the only constant during measurement.
It lies flat (horizontal or on the X-axis)
irrespective of the picot thread or the picot gauge.
In A, we measure the height of the picot (5mm in this case) and the finished picot is of the same measure viz 5mm.
In B, we measure the length of the picot (10mm in this case) but when finished, the picot will measure 5mm.
Length of thread in any picot is twice the height of that picot.
Conversely, height of picot is half its length. 
In A, multiple picots can me made before slipping them off the gauge.
In B, only 1 picot at a time is possible.

Thus the seeming dichotomy is resolved. But this is not all. There are ways to use the gauge unconventionally; and ways to measure a picot without using any separate tool (see collage below) !!! These are all covered in the article, along with pictures – some stepwise. 

Part of the article was published in Bellaonline on July 12, 2018. More sections were added later, and refined further, to make it quite a comprehensive document.

Click to download the pdf of the complete article -

This article is a compilation of the many ways – old & new - to measure a picot. Each method has it’s advantages and it is entirely up to the tatter to choose the method(s) they prefer. The article makes no claim of superiority of one method or of one gauge over the other.

The contents of the article :
I.  Orientation of Picot Gauge – horizontal and vertical
II. Orientation of Picot Thread in Relation to the Core Thread – height (vertical) and length (horizontal)
III. Non-conventional  Applications/Uses
A.                  Direct Tatting (unflipped stitches)
B.                  Decorative Effects
C.                  Graduated Picots 
D.                  Multiplier Effect of Gauge 
E.                  BEADS as Picot Gauge
IV. Stitches as Picot Gauge – length and height
Recap / conclusion
References
¯¯¯¯¯

During the course of my research, many good friends helped with their own insights, though not everything was included in the final article. This post is to share this new information rather than repeat what’s in the article.

Historically, a pin was used to measure the picot loops. “Tatting. Edgings and Insertions”, Mlle Riego de la Branchardiere, 1861.
‘A Pearl Loop – After the number of double stitches are worked as directed, the thread which forms the loop round the hand is passed over the pin, invented for the purpose, facilitates the work.’
Since a pin has a circular cross-section, there is no vertical/horizontal dilemma here. The number of times one wraps the picot thread around it can alter the size of a finished picot.
This same technique is used by Jon Yusoff on modern gauges for extra long picots! The collage above shows how to measure a 10cm picot using a 2cm gauge.

¯¯¯¯¯

Bonnie Swank (through Anita Barry) sent me her description derived from “The Art of Tatting”, Lady Hoare, 1910, page 20. 
“Pinching the ring and shuttle threads together then tatting the double stitch and sliding the new double stitch next to the previous double stitch.
This is a horizontal method of making the picot without a gauge.”
Lady Hoare suggests ‘leaving about the eighth of an inch of thread on both loop and shuttle threads….’ This is what we refer to as eyeballing.
¯¯¯¯¯

An elementary and universal method is to employ
the stitches themselves as a picot gauge.
If a gauge is not available, the stitches themselves can act as a gauge. Even beads can be used for measurement if size is known. The advantage of using one’s own tatted stitches as a gauge is that it accommodates all types & sizes of threads as well as individual difference in tension.
I used the height of a picot-in-the-making to estimate the size of central picot and arrived at the following thumb rule. Jane McLellan stepped in with trials, experiments and feedback to confirm the rule.
A thumb rule for measuring the central picot
around which rings will be linked :
1ds width for each ring.
(± half stitch to account for individual differences)
¯¯¯¯¯

While technically not a picot, it is a different way of using a picot gauge. Jeanie Schekel, in her unpublished book, calls it a folded picot gauge ideal for bare thread tatting and mignonette. She shared her images and also these video links –  Double picot gauge by needledreams and this video by mytattingplace which also shows how to get uniform half-closed rings.
¯¯¯¯¯

Coretta Loughmiller sent me many pics of the BTS and Picot Tool being used. Now this stepped tool, at first glance, defies the vertical/horizontal position. However the detailed markings of length and directional arrows helps us understand how to hold and use the gauge to measure either the height or the length of the picot thread and also bare thread. Gloria Nelson, the designer & manufacturer of this compact efficient tool, has been most gracious in our communication, even offering to send in more pics.
Such markings are a good way to avoid any confusion and communicate clearly - whichever gauge a designer uses.
¯¯¯¯¯

Martha Ess’ sliding gauge is ideal for graduated picots. She graciously gave me permission to use any of the photos and instructions!
¯¯¯¯¯

I’d like to sincerely thank each and everyone mentioned 
for prompt and enthusiastic help – over and above my expectations !  
And I cannot thank Robin & Georgia enough! 
Robin Perfetti has helped proof the multiple drafts carefully and offered valuable feedback/suggestions. Some of the words, thoughts & of course images, are hers. 
Georgia Seitz has provided us with a wonderful platform and opportunity to reach a wide audience through Bellaonline and her Online Tatting Class.

Friday, 17 November 2017

a star is born

Pin It now!
Another new pattern for the, ummm, Medallion Series …

Penta Fleur medallion


This was made over a week back. Nothing much to write here. I wanted to throw off the central ring from a chain and this pattern was the result of that quest. It is tatted in one pass.

I do like the way the long/double picot completes a ‘petal’ and a 5-petalled flower emerges from the confines of a pentagonal star. Based on this I decided on the name and when I Googled it, found that Pentas or penta fleur really is a flower ! Also called Egyptian Star. How opportune is that! Except that I'd already completed it in green otherwise perhaps a red or pink would be more appropriate.

I used Anchor size 20 but we know that it is thicker than Lizbeth 20.
Measures approx 6.5 cms at the broadest points.
Tats up real quick but a picot gauge is required for the long picot. I used a 3/8” gauge held vertically ie. perpendicular to the core thread.

The first trial in tinted blue. Not all chains of same length; other minor tweaks also went on.

Incidentally, while making this, if I had joined the chains differently I get another pattern. I’m really eager to see if the idea works!

This is a diagram-only presentation. In case of any difficulty, you know where I’ll be ;-D

happy tatting always !


Tuesday, 22 August 2017

gauging the lie of the land

Pin It now!
(Common Threads III)

When making a picot in tatting, there are mainly 2 factors involved.
Which 2 factors ? – the half stitch(s) on either side of a picot and the position of picot gauge !
An interplay of just these factors can change the look and effect of the picot, as well as it’s functionality.
Comparing 3 types of picots here - interlocking, Mrs. Mee, & tuft - got me thinking about picot gauges. Gauge position was very interesting.

It started as a deconstruction of the 2 factors in various picot types we know of, but that is a Huge study and I’ve only just bit a small morsel at present and will require more time and concentration than I can manage at present. But keep an eye out …
For the present, I’m sharing only the various positions of gauges (that I know of. I welcome more input).

Picot Gauge in relation to Core thread
& where the stitch faces

Vertical v/s Horizontal
These are the standard options that we are all aware of.
I’ve used a 8mm gauge vertically and a ½in gauge horizontally.

Notice (in traditional tatting) -
In normal rings and chains the gauge lies above the core thread, whether it is held vertically or horizontally.
Vertical position -  picot has the hand (for ring) or ball (for chain) thread wrapped around both sides and we get the same size of picot as the width of gauge. Stitch is formed at the base of the gauge since gauge is at right angles to the core thread.
Horizontal position – the hand/ball thread lies across the entire width of gauge and the resulting picot is half the length of the gauge. Stitch is formed at the side of the gauge since gauge is parallel to the core thread.

Common practice is to RW – reverse work after a ring to tat the chain. But what if we don’t RW, and work the chain directly using unflipped stitches?
Carollyn pointed out an interesting aspect with beautiful pics here.
(in direct tatting)
If chains are tatted directly using reverse stitch ie. unflipped stitches in reverse order, then the gauge is held below the core thread, vertically or horizontally.
It holds true for reverse rings and 2nd side of split ring as well .

This establishes that where the stitch faces while tatting decides where the gauge is held!


Picot Gauge in relation to Core thread & the Half stitch

Now let’s bring in one more factor – the half stitch where the picot is to be made.
In all the following pictures, I have used the 8mm gauge vertically.

Picot is simply a length of bare thread between 2 half stitches.
Let’s tackle the fhs - first half stitch first.
After 4 stitches, we want to make a picot followed by a fhs. Above pic shows fhs being formed. Let’s call the left part the arch which will be compressed into a picot, and the right part is the loop of the half stitch.

Gauge is held above core thread, under the arch.
Inset pics show the completion of the process to form 1 picot.

Gauge is held above core thread, through the loop.

Gauge is held below core thread, through the loop.

Similarly for shs – second half stitch.

Gauge is held above core thread, under the arch.

Gauge is held above core thread, through the loop.

Gauge is held below core thread, through the loop.

Can you identify the gauge positions for regular picots, interlocking picots, Mrs Mee picots, and the tuft picots that were described in this post ?


If this seems confusing, pick up some scrap threads and give it a quick try to discover the joy of versatility! And like I said, this is only a tiny glimpse into the beautiful world of picots.


Happiness lies at the Core of Tatting !
Stay happy stay tatting always :-)