Saturday 13 February 2021

happy hands heart

Pin It now!
Happy Hands Heart
- free pattern by muskaan © Feb 2021

Almost down to the wire, but then hearts are in style throughout the year, especially if they bring happiness, happy hands and hearts with some chocolate thrown in!! And it's a fairly quick tat with not much thread required. So jump right in 💖

Based on the trials here, I worked another (top) last evening and then one more (below) which I am counting as the final pattern. Wish I could've tatted it more neatly, but it will still remain unforgettable since the earth literally shook while I was tatting! Earthquake tremors.

Design TIP: I used roll tatting instead of normal chains or lock chains for the lower segments because roll tatting is the narrowest 2-thread tatted line possible, right? 

There are numerous ways one can tat this tiny heart. I am sharing only one path and method. Feel free to adapt to your imagination (and skill level) but please share your version! Depending on individual tatting tension, you might have to tat one less or more half-stitch for the flushed chains.

Materials: 
Best worked in size 10. In Anchor size 20, this motif is 3cms tall and 3.5cms wide.
2 shuttles wound continuously (ctm). (In my yellow trials I had worked with a single shuttle and ball, using SLT to keep shuttle in hand).

Techniques used: fs/bs tatting, dimpled ring, mock ring, lock join, CWJ & DYJ optional, roll tatting. All tutorials can be found here- https://tipsaroundthehome.blogspot.com/p/tatting-resources.html

Abbreviations: Sh = shuttle; -/p = picot; + = join; RW = reverse work; LJ = lock join; dnrw = do not reverse work; SS = switch shuttle; CWJ = Catherine Wheel Join (for frontside); DYJv = Dora Young Join variation (for backside); w = wraps )for roll tatting) 


    Start with Sh1 in hand.
    RingA: 3 - 5 - 5 - 5 + 5 - 5 - 3. RW (this is the central heart-shaped dimpled ring)
    ChainB: p 3 LJ 5 LJ 10. RW
    RingC: 6 + 2 - 6. dnrw. SS
    ChainD: 20 CWJ, 16 wraps, LJ 
    ChainE: p 3 LJ 5 LJ 10. RW
    RingF: 6 + 2 + 6. dnrw SS
    ChainG: 20 DYJv, 16 wraps, LJ 

    ChainH: 3 - 3 LJ. 
    Tie and cut and hide ends. 

💗💗💗
UPDATE (April 2021): NEEDLE NOTES by Pam Hemenway 

RA) 1) Paper clip to hold the ring and pull tight 2) Work to first join and pull off needle to make join.
CB) 1) Picots I picked up with needle point to use working thread would twist stitches.
CD) 1) Roll tatting = ds 16 wraps around the needle ds Hint- hold tight it is a bugger to take out and re-do.
💗💗💗

Some Ideas and Possibilities -
  • Add beads and findings and use as jewellery - pendant, earrings, brooch. Inverted, with beads and a braid/chain, it can work as tikka jewellery for brides!
  • Of course, applique on fabric or glue to paper. Motifs can be used anywhere! By the way, that chocolate (Lindt Lindor Milk Chocolate) is seriously one of the Best I've tasted. 
  • Arrange/sew motifs stacked vertically for bookmark. When joined in a row (with additional picots) we could get an edging or trim, or even a choker! 
  • In the above arrangement, it appears we'll need 5 motifs to complete the polygon. Hmmm, I see a possible 4-leaf clover leaf there, too!
  • And this is such an appealing Arabesque arrangement! Love the curves.
  • UPDATE: I forgot to upload this at the time. The 2 yellow hearts can be worked continuously by tatting the tiny hearts at the bottom as a split rings to climb out of one heart and climb into the next.

So, what will you be making?! Enjoy 💕

UPDATE: Check out His Kid (Sue's) wonderful adaptation of the heart into a mermaid tail, with part of the body as well - http://hiskid66.blogspot.com/2021/03/inspired-by-muskaan.html
UPDATE: Diane Howe adapted this into a Shamrock leaf! - post and pattern - https://tipsaroundthehome.blogspot.com/2021/03/lucky-hands.html

UPDATE: Aug 2022
There are now so many adaptations of and from this heart - all are listed, with patterns, in the EP doc - https://docs.google.com/document/d/17LEVftXweztBIOWh4sL4BB7bX65ssoOsOn4oXIgCepY/view

33 comments:

  1. Lovely little heart! Endrucks is a constant source of inspiration, since we've started this project!

    ReplyDelete
    Replies
    1. Oh yes, I'd like to most of the patterns in that book, especially now that they are modernised 😆 Thanks, Ninetta 💗

      Delete
  2. Replies
    1. You are making me blush, Elena 😀 Thank you 💗

      Delete
  3. I love the little heart now i have to go find how to do rolled tatting I see mickey mouse, and still can't find the 4 leaf clover but i keep looking. love your work and thanks for all you share.

    ReplyDelete
    Replies
    1. Funny Pam, I see Mickey Mouse too! ;)

      Delete
    2. Thank heavens all you see is Mickey Mouse! I feel as if it's Popeye flexing his beefy forearms 😄😉😃 Pam, you can find links to tutorials here - https://tipsaroundthehome.blogspot.com/p/tatting-resources.html. Remember to dangle the shuttle frequently to remove twist. You can substitute with normal chain (10 or 11 ds).

      Delete
    3. I am a needle tatter (new teacher for needle at the online tatting class) and no shuttles to dangle, lol

      I do have one question on the chain you start off with a "p" is that a mock picot? I have checked the abbreviations and didn't see it or in the special stitches.

      Delete
    4. Oh, I've corresponded with you, Pam...didn't realise. 💕
      Now I'm intrigued - roll tatting or Josephine rings/chains have an inherent tendency to untwist the thread. So with needle, this does not happen?
      The p at start of chain is a normal picot. After ring, RW, and leave a normal small picot before beginning the chain. The picot is made with the knotting thread, not the core.
      I found the need to make this p so that there is not too much overcrowding and squishing at the base of ring with the many joins there.
      Hope this helps?
      It would be great if you could share your needle tatting notes when making this heart. And I'd love to share it, along with your model here. 😍💖

      Delete
    5. Muskaan
      Thank you for your answer it is what I thought but just never seen a p to start a chain before. I will gladly add needle notes.
      Yes Josephine chains unwind and yes to the untwist also but I found if my twist is going right, I use the 2nd half of ds and reverse for opposite twist. It works with the thread rather than against it. But we do have the needle to hold against until it is done.
      I do see what you mean about the overcrowding at the bottom I will make more before I am happy with it.
      I made mine but need to improve on the center dimpled ring. It looks much better in single color I used multi color thread.

      NEEDLE NOTES:
      RA) 1) Paper clip to hold the ring and pull tight 2) Work to first join and pull off needle to make join.
      CB) 1) Picots I picked up with needle point to use working thread would twist stitches.
      CD) 1) Roll tatting = ds 16 wraps around the needle ds Hint- hold tight it is a bugger to take out and re-do.

      Delete
    6. Many thanks, Pam, for this detailed response. 😍💖 I will update the post to help out needle tatters.
      Certain techniques are easier with the needle than shuttle, and it appears like spiral tatting and roll tatting could be among them. Like you said, they are made over the needle, giving them a solid base and consistent tension while in progress.

      Delete
    7. I did another and I did it a bit different on the dimple I tied it tight before joining the dimple and the roll I did not do the ds on the 2nd one you can see the lump of ds on the first so I left it off but hold on tight lol or you will have to restart. but it looks so much better. Here is the link to the photo if allowed https://www.facebook.com/photo.php?fbid=139705824826739&set=pb.100063619655954.-2207520000..&type=3

      Delete
    8. This was fun for me. Thanks

      Delete
    9. I can't thank you enough, Pam 💖 I uploaded a new post dedicated to your notes and models - https://tipsaroundthehome.blogspot.com/2021/04/needling-heart.html

      Delete
    10. You are so welcome. Glad I could help.

      Delete
  4. Oh man!!! I see all kinds of things in your hearts today. I will have to have time this week to see if I can tat any of them. ;)
    Wonderful hearts!!! :)

    ReplyDelete
    Replies
    1. It will be Wonderful to see what you create, Sue 😍

      Delete
    2. Hi muskaan, I just posted one of the inspirations from your heart on my blog. ;)

      Delete
    3. Gosh, Sue, I checked out your Fabulous adaptation - makes for a very happy mermaid, I'm sure :-))) Thank you for sharing your work - I have updated my post with a link to yours 💖👍😍

      Delete
  5. February is heart month apparently and hearts are always popular, as you say. Thanks for the pattern.

    ReplyDelete
    Replies
    1. It certainly is a good excuse to design and tat hearts, Jane 😉 Thank you 💗

      Delete
  6. Replies
    1. Hope you are enjoying a 💖-filled weekend, Anetta 😍

      Delete
  7. Beautiful hearts, love the bookmark, thanks for sharing your pattern

    ReplyDelete
    Replies
    1. Ah yes, I might join the 4 motifs and add a tail for a bookmark, Margaret --- better than misplacing these tiny motifs 😃 Enjoy 💗

      Delete
  8. I love your hearts! And looks like Minnie Mouse, so cute!!
    erba

    ReplyDelete
    Replies
    1. LOL, yes M Mouse seems to be the flavour of the month here, ERBA 🤪💖😍

      Delete
  9. Beautiful adaptation. Thank you for sharing ❤️❤️❤️

    ReplyDelete
    Replies
    1. Happy you like it, Vicki 💖 His Kid is kicking up a storm of adaptations with mermaid tail and now a butterfly!

      Delete
  10. These are so cute and sweet! I think they would be great attached sideways as an edging too!

    ReplyDelete
    Replies
    1. Hmm, I wonder I didn't think to take pics of such an arrangement?! Thanks, Emily 🧡💛💖

      Delete
  11. I've made a shamrock version using your heart. Can I email it to you to share?

    ReplyDelete
    Replies
    1. Please do, Diana, I would love for you to share it with my readers 💛🍀💛🍀💛 Email me at mooskaanm at gmail dot com.

      Delete