Friday 8 June 2018

that one magic node

Pin It now!
Inkscape hack #3

Be it any medium, I am a freehand, freestyle person. 100% accuracy and precision takes a huge toll out of me. Freehand makes me joyous, even if minor flaws creep in. Trading practicality and hedonism for perfection - my mantra or excuse?! ;-P

I had been pleasantly engaged in drawing a seemingly complex tatting diagram for my mate. It consists of many parts that are not all symmetrical. The many sized rings and chains not only face in different directions but some elements have lots of picots.

For picots, I find it easier to draw small straight lines individually with the Bezier (or pencil) tool – trying to orient as I draw. This gives me a quick first draft. Then I group them together and change their value, colour, etc.

Length and orientation may still need tweaking when the whole element/portion is done. Earlier, I would select each picot and use the arrows to do it. Not always convenient since the lines are relatively small and the arrows come in the way (how much can one zoom for each picot – my old compy can’t handle it ;-D)! Further, unless the Control key is held down, the thickness/value of the line changes. This meant an additional step to bring back the required value.

This time I discovered a very easy and sure-fix method that has multiple advantages. All we need is Just One Node! Quite magical, I’d say :-)

We can use a single end node to increase/decrease length and tweak direction. We can also shift the start/end nodes for proper alignment with other elements.
The greatest advantage, besides ease and speed, is that the thickness of the line does not change at all! And it is great when drawing asymmetrical diagrams

Robin’s tutorials cover symmetrically placed elements, and she uses the pencil tool to draw picots


I. Straight Line (Picot)
Choose just one ‘end’ node to change length or direction ! 
(see diagrams below)

Fig1 shows the first draft lines for picots. 
After selecting the picot to be tweaked, I choose Node tool. 
One can choose either of the 2 end nodes. The chosen one will become red coloured to show it is active. 
Then drag 'outwards' (in relation to the line/picot) to increase length (fig3) ; 
drag 'inwards' to decrease length (fig4) ; 
or drag sideways to right or left to change direction (fig5).

II. Curved Line/Arches (Chains) :
Choose just one node to shift arches - length or position ! 
(see diagrams below)

You might remember my quick and easy way to draw a continuous line of chains and create arches between two nodes. Sometimes, after changing the value or on close inspection I find that the points are not aligned correctly - 
one point may either not touch the ring (fig3); 
or may have invaded inside the ring (fig4); 
or may be misaligned (fig5).
All we need to do is select that point, convert to Node and move it in desired direction !

I'm sure this hack is nothing new. But for me it was an exciting self-discovery !!!

Related Posts :
Inkscape Hack #1 - drawing continuous chains
Inkscape Hack #2 - designing from pre-existing template 


hope this shortcut is helpful too...

14 comments:

  1. Thanks for sharing your discovery!

    ReplyDelete
    Replies
    1. My pleasure, Jane :-)))
      A few of my shortcuts are now so much a part of my repertoire that I've 'forgotten' about them... so I shared this ASAP.

      Delete
  2. I see you are going to force us learn to use the computer for tatting diagrams:) How long will I put this off? :) hugs from You technically challenged friend Carollyn

    ReplyDelete
    Replies
    1. Robin got me going, so I'm glad if this inspires some of my tatting friends, Carollyn :-))) Pass it forward !
      Your hand-drawing skills more than compensate for any tech-challenge you might have, though :-D

      Delete
  3. Thanks you know when I started blogging I learned way more that I ever thought I could and then I had to experiment with picture taking and have grown tremendously on that too. I do expect this skill will be worked in soon 😃

    ReplyDelete
    Replies
    1. Carollyn, you know I admire your photography and choice of backgrounds tremendously :-) I'll be looking forward to your Inkscape drawings now ...

      Delete
  4. I still don't have the hang of Inkscape. I think I would easier use a photo of my tatting and add the numbers there. I'm glad you are finding good tricks to make diagrams faster, thank you for sharing!

    ReplyDelete
    Replies
    1. Lavi, Inkscape or diagramming in merely one of the methods of depicting a pattern. And each has it's special value. I let the pattern decide whether it wants to be diagrammed or go another way ;-P

      Delete
  5. Practicality doesn't rule out being accurate. Perhaps you could find a way to combine both approaches.

    ReplyDelete
    Replies
    1. It was a manner of speaking, Judith. I'm sorry you focused so literally on that first para ;-D
      My work is Never inaccurate (I share my mistakes when I am wrong) even if it is not as neat and pristine perfect or precise as I'd like it to be or as it once was.

      Delete
    2. LOL, Judith, I concede my statement in the post is 'inaccurate' :-D

      Delete
    3. Considering that anything we share online will be around for a l-o-n-g time, as teachers/tutors we shouldn't settle for second best. :-)

      Delete
  6. I take courage from your posts. I gave up trying to diagram. There was just too many ideas to try and not enough hours in the day! But, now, with Robin's help, I guess I really should bite the bullet. Then more could tat what I come up with . .... Right?

    ReplyDelete
    Replies
    1. Absolutely right, Mel ! You know I couldn't have done it without Robin's tutorials. And after that, the more you play and diagram, the more you add to your repertoire - your own shortcuts, preferences, ... So "bite the bullet" - a little everyday ;-D

      Delete