Pin It now!
When
I shared my tips on how to keep tatted motifs uniform, I received a lovely
email from tatter & teacher Jeanie enumerating her own list. Now she’s been working on
an altar cloth that already has over 400
motifs tatted over a span of years. She’s guessing somewhere between
600-800 hours spent on it, with another 200 hours’ work still left. She’s had 2
mishaps with dye-lots and one with staining due to some finger nail polish. This experience is reflected in the tips.
So,
let the master speak! A few of the points have already been covered in my list, but I’d like you to read it in her own words …..
How
To Tat Uniform Motifs and Medallions (contd.)
especially
for long-term projects
Jeanie
Schekel
"In my experience, most
patterns require the motifs to be joined as the last round is tatted so the blocking
is done after the motif is added. I usually only block nightly. I have seen a
few patterns where two sizes of motifs are used and one size is joined by a
smaller motif. This type of pattern would allow one to block some of the motifs
before joining. Because my project was so large, I used a grid as a guide and
marked on the grid the progression and completed motifs.
 |
| (She sent me this pic in Dec, 2018) |
1.
I would suggest that one make several motifs and compare
them before you begin the project.
2.
Measure the thread for one motif and calculate the amount
of thread needed and make sure you allow for a mistake or two, so you will have
enough of one dye-lot.
3.
Write down every detail from starting with continuous
thread, and any adjustments you make in the pattern, just in case of an
emergency that can interrupt your tatting time. Time can affect your memory.
4.
Note where to add magic loops.
5.
Tat most of the last round calculating where to begin
joining, and repeat the exact process as often as possible - saves time,
calculations and mistakes.
6.
Don't let a lot of time lapse between motifs. A month is
too long for me.
7.
Don't tat other projects with another size thread while
tatting this project; it can affect your tension.
8.
When tatting with white thread, you can avoid any
discoloration from body oil. Tape part of waterproof bandages, or liquid
bandage painted on the area where the pinching finger and thumb touch the
thread, as well as the palm side of the finger where the thread wraps. The
sweaty side is the inside of the fingers that touch the thread."
♡♡♡
As
you may have deduced from both lists, consistency is the key. Consistency even
in the most minute of details, especially if it is a long-term project.
As always, your input and feedback is valued, so do say something :-)
Many
many thanks, Jeanie
