4 colour broad Cluny tatting

Pin It now!

Final installment of colour Cluny tatting pictorials.

This collage shows the progression of Colour/striped Cluny Tatting pictorials I shared this year. While stepwise directions are given for regular tallies (and a broad one below), the same concept can be applied to Hanging Cluny Leaves, as seen in the collage center.

Four-Colour Broad Cluny Leaf

(5 threads and 4 colour stripes)

Using 4 colours for Cluny tatting meant the coloured stripes would show better in a broad tally. Hence I resorted to a 4-Warp loom and also changed the leaf shape a bit.

Notes and Links :

• how to weave a 4-Warp loom – click to download pdf for stepwise directions.

• My one small step really comes in handy here since multiple loops need to be closed in the end. It is done Twice in a 4-Warp loom because there are 2 top loops to close at the end.
• Continuing with the braid from the 3 colour tally, I made a split ring, encapsulating the pink and yellow threads on either side. Then I brought in the 5^th thread – blue and mustard was again used for the loom.
• I recommend hitching the loom before actual weaving commences. These year-old pics do not show that step.
• how to add new thread and hide the tail in the Cluny leaf.
• how to hide loom colour blip on top.
• Only major steps are shown below. eg. only one pass of a weave/wrap is shown. But remember to bring the thread back to the side where it starts.

Brief  Pictorial 

1. This is a 4-Warp loom. In order to close tally on the loom itself later, 

One Small Step is done twice – under the AB bar, and again under EF bar.

2. Bring 2 colours/threads to the right side, making a pass (under-over-under).

Before this step, I now find  hitching the loom helps center the tally and hide any colour blips. (not shown here, since these pics were taken a year back).

3. All 4 needles/threads are in place, 2 on either side.

4. Start weaving with green keeping yellow below: over-under-over-under to the left. 

Return to the right : under-over-under-over (not shown) to complete 1 weave or wrap.

5. Pick up pink from the left, entrapping blue within and move to right : over-under-over-under. Return to left : under-over-under-over (not shown) to complete 1 weave/wrap.

6. Pick up yellow, entrapping green, and make 1 weave/wrap as in step#4.

7. Pick up blue, entrapping pink, and make 1 weave/wrap as in step#5.

Remember to keep tensioning and packing down the weaves.

Note: In this manner, each needle/thread returns to it’s starting side, 

making a single weave colour strip.

8. Repeat from #4 to #7 to desired shape and size.

Note: colour placement and width of each colour strip depends on pattern and desired effect. 

(In the flame here I used 3 colours with broader stripes at the base)

9. The broad 4-coloured striped tally is complete.

10. Closing the tally and avoiding colour blip : 

bring pink & blue needles from under the AB loop and close loop by pulling downward at BC.

11. Pass green & yellow needles through the EF loop from above, ….

12. … pull off the EF loop from loom and close by pulling downwards at FG.

Then pull the remaining single loom thread upwards at I to finally close the tally (not shown).

13. One broad 4-colour striped tally made. 

The pic shows the tally first from the front, then from the back.

All Cluny Tatting posts with lots of tips and possibilities

This collage shows the application of coloured/striped tallies in various projects.

basic colour variation practice braid & Jennifer Williams’ motif ;

2-tone Cluny bracelet pattern ;

Coloured Cluny Butterflies pattern;

3-colour pendant and diya flame prototypes.

I have a couple of practice patterns on the draft board for 3- and 4-colour Cluny leaves but may not be able to get to them till the new year. But stay tuned, one never knows when inspiration to weave may loom large on the horizon!

There are definitely some non-Cluny patterns in the next few posts!