refresher

Pin It now!

The weather calls for frequent cool refreshments; my memory calls for frequent refreshers !

This post is a refreshed version of my previous post where I had a posted a hasty response as update. I was not fully satisfied. 

Reason : I had tatted the SQDR in 2014 ; then the RR in 2015 ; and was writing the post in 2016. During the intervals neither of the two techniques were used. High time for a refresher course, right ?! And I needed to confirm my explanation/comparison. 

This time, trial tats are included for easy comparison.

Also, as I hunted online, I found a few more tutorials/videos. Incidentally, I had already tatted samplers of some, & only later found that videos were already online. So here I go again ….

Practice Pattern Used :

SH1 – pink ; SH2 – shaded green.

2 colours used for clear distinction. Variegated thread gives more idea of the direction & progression.

I start with a 1” long lock chain to show clearly where the threads emerge after central ring is closed.

Disclaimer : This is not a tutorial but a collation/annotation of methods, with a few trials thrown in. The terminology, origin, & collection is limited to and limited by the knowledge & comprehension of the blogger, and to the resources consulted to date.

Common threads Set II : Rings On Ring

or 

Central Ring with Multiple Thrown Rings

The traditional method of tatting the ‘daisy medallion’¹ is to make a central ring with picots, then cut & restart the next round, or climb out with a mock picot. The next round consists of rings that are joined at each picot either at their base when using single shuttle (with bare thread between rings) or at their tips with chains between adjoining rings when using shuttle & ball.

But tatters have long since hit upon ways to tat rings directly on the central ring. These are called thrown off rings, thrown rings, or floating rings. No picots or second round  required – all tatted in one pass. The thrown rings can also be Josephine rings.

I was interested in seeing whether one can throw multiple rings off a central ring, yet emerge out at the starting point. There seem to be at least 4 main ways to achieve this goal :

• Loop Tatted Ring on Ring
• Wrong-Way Tatting or Reverse Ring;
• Split Quadruple Directional Ring  aka Ring Off Split Ring;
• Mock Ring or Self Closing Mock Ring

I continued the experiment a bit further, branching out to separate exit points or using 2 different ways to throw rings off the 1^st side of a split ring. But these are off-shoots of the above set. One can also tat the central split ring using Dora Young Method and throw rings off it², but it is rarely used for SRs any longer. If one is working with a single shuttle, then this can be an option.

I must also admit that with the ease of tatting a SCMR, many of the other methods have limited use.

A 3-page pdf includes the 3 pics above. Click here to download pdf . 

Since it is all tabulated/notated, I am restricting textual explanation here to comments/pointers & some tutorial links.

1. Loop Tatted Ring on Ring (LTROR)

Most useful when tatting with a single shuttle.

Some dexterity with finger-tatting is required (although loop can be inserted into a shuttle temporarily). 

Size of central ring & number of thrown rings are limited since the central ring is a true ring.

LTROR with pattern by Sabina Carden-Madden 2008 , diagrams by Jane Eborall 2012 and diagrams by Jane Eborall and by Anastasija P. Yelisejeva 2012 , video by Karen Cabrera 2013

2. Wrong-Way Tatting or Reverse Ring (RR)

Tatting direction is opposite to that of LTROR, and central ring is tatted with reverse stitch instead of double stitch. Core thread differs from stitches, hence 2 shuttles required. Care must be taken when starting the ring. Limitations similar to LTROR. 

This method of tatting may be ‘normal’ for left-handed tatters.

Rebecca Jones' 1985 book 'The Complete Book of Tatting' calls it Method Five - Wrong-Way Tatting (p26)³; Ruth Perry's Tatted Reverse Ring with Rings Thrown Off video & her RainBeau hedgehog pattern 

3. Split Quadruple Directional Ring (SQDR) or Rings Off Split Ring

The central ring is a split ring, with thrown rings on the 2^nd side. If the 1st side has a single DS as in this pattern, then the threads exit almost at the starting point as in LTROR & RR. If both shuttles have same thread, the split is almost indistinguishable. Teri Dusenbury 1998 named it SQDR, with instructions & pattern. This term has been substituted by the Ring on/off SR - diagrams by Jane Eborall 2008, and video by Karen Cabrera

The 2^nd model on right side has more DS on 1^st side for comparison, but notice the exit of threads. 

Loop Tatted Ring on Split Ring (LTROSR) 

Major limitation of Rings on SR is that thrown rings are made only on the shuttle2 side.

This limitation can be overcome by throwing LTR (loop-tatted rings) on side 1, as seen below, But threads will exit from a point other than the starting point :

video by Karen Cabrera

See also MROR below.

4. Mock Ring (MR) or Self Closing Mock Ring (SCMR)

This technique has solved all problems or limitations of above techniques. Rings can easily be thrown anywhere around the central ring; both central & thrown rings can be as large as one wants; the threads will emerge at the starting point; all tatting is from front in clockwise direction, using only DS.

The only limitation is if one wants thrown rings in 2 different colours.

Mock Rings have been around for over a century⁴, although SCMR is a relatively recently coined popular term. Diagrams by Jane Eborall 2008

Mock Ring in Split Ring (MROR)

I have included this method to compare with LTROSR. It uses MR to throw rings on side 1 of a central SR, although strictly speaking the threads will not exit at the starting point ...

 

Interestingly, side 2 is tatted first, then side 1. Multiple rings can be thrown on side 1 of the central ring, but the multiple loops are difficult to control. Moreover, since the loops remain open till the very end, size & number of rings need to be curbed. Requires quite a bit of practice, but if one single thrown ring is required, this can be adopted. 

diagrams by Ninetta Caruso 2012,  as well as stepwise pictorial with tatting ; video by Karen Cabrera

Here are my trials with the MROR ... even with these many trials, I could not control the shape & the central ring tended to lose it's curve.

Tried multiple little tweaks & kept referring back to the pictorial, diagrams & video. Finally I have come to 2 conclusions : the thrown ring has to have a certain minimum stitchcount for a good shape & control ; it may not be advisable to have a large central ring, or multiple thrown rings. One medium to large MR on a SR is ideal for me.

To Summarize :

This compilation has explored the various choices one has. But with the ease & scope of a SCMR, this has become a bit of an academic exercise. Notwithstanding, each technique can have it's advantages in specific situations, to get out of a tight corner, or for a designer.
How one chooses a particular technique of a combination of one or more, may be determined by :

• pattern requirement,
• colour placement when working with 2 colours,
• size of central ring,
• number of shuttles being used,
• number, size & position of thrown rings,
• exit or climbing out point(s) of threads,
• skill & comfort level of tatter. 

Phew !!!! Hope some of this is helpful to someone ! free pdf download

happy tatting :-)

¹ Elgiva Nicholls' 'Tatting: Technique & History' 1984
² discussed by Patty Dowden in this Craftree thread
³ cited by Judith Connors' in this Craftree thread
⁴ Judith Connors' An Illustrated Dictionary of Tatting'

Related post : Ring with Thrown Rings

Bookmark with SQDR
Hedgehog with RR

the hedgehog turns !

Pin It now!

The Hedgehog Turns !

(tatted on July 28, 2015)

While deep into the Cluny Tatting series I posted last year, some relaxation & distraction was in line. 

It came in the form of this cute hedgehog pattern that I first saw on Craftree, here . What drew me to the pattern was the use of Reverse Ring (RR) . I hadn’t done this since my first time in Teri’s Dandelion ChainLink Bookmark ! High time I tried it again. (In 1998, Teri called it the Split Quadruple Directional Ring (SQDR).

And sure enough I had forgotten ! SQDR or RR is tatted all from the front, including the thrown rings that emerge from it. But I used reverse order stitches in the thrown rings. That’s how the hedgehog turned !!!

RainBeau the 2009 Appalachian Festival Hedgehog *

Ruth Perry (Rozella Linden) 

Materials :
Anchor Mercer Crochet Cotton Size 20. Shade White w/ Tan 4054-1218

2-shuttles CTM.

It measures approx. 3”x 1½” 

Techniques used : 

SQDR or RR, fs/bs tatting (RODS), decorative picots, thrown/floating rings, padded double stitch, SLT (or turn work/folded chain or direct tatting) , split ring, lock join.

Abbreviations :

CTM - continuous thread method of winding 2 shuttles

LTROR – loop-tatted ring on ring

pds- padded double stitch

RODS – reverse order double stitch (as in frontside/backside tatting)

RR – reverse ring

SCMR – self-closing mock ring

SQDR - split quadruple directional ring

My Notes

The central ring can be tatted in at least 3 different ways:

i.         SQDR / RR (remember to tat from front only & post shuttle 2 before closing ring)

ii.       Mock Ring ( preferrably SCMR) with thrown rings

iii.      LTROR (loop-tatted ring on ring) 

We are quite spoiled for choices :-)

As mentioned above, I tatted the thrown rings in RODS. Decided to continue with RODS in chains, resulting in a hedgehog that faces the opposite direction to the one in the pattern ! This pic shows the hedgehog from the back side.

Added more picots for a fuller spinier back. At one point I thought of making twisted picots (floating) but wasn’t in mood to do the twist. 

I most probably skipped the SLT for snout. Either made a folded chain (vsp, 2 half stitches) to turn the chain; or I may have switched shuttles for direct tatting (reverse stitch). I don't quite remember after 1 full year.

Used padded double stitch for tail : 1pds(3,3), 1pds(3,2), 1pds(2,2), 1pds(2,1). Tie & cut.

Basically, 4 padded ds with decreasing number of wraps .

I could’ve added a black seed bead for eye. (shown in the pic is a painted black eye).

The piece is unblocked - fresh off the shuttles.

Many thanks to Ruth, for sharing this cute & fun pattern

happy tatting :-)

I'm on a tatting-free break for the past week in order to recharge my batteries. Yes, there is a whole backlog of posts (projects, tat-alongs, tutorials) & tatting to accomplish, but it was getting stressful & slow-paced. I am, however, taking this opportunity to upload some such old projects & reduce the backlog a tad.

update : 
This segment is in response to a question in the comments below.
It is a quick post, & limited to my understanding at this point in time. Hope there are no errors !

common threads - SET II 

Ring with thrown rings

I have included 5 techniques by which we can have thrown rings on a ring : SQDR, RR, SCMR, LTROR.

What is Split Quadruple Directional Ring (Teri Dusenbury) 

or Reverse Ring (Ruth Perry) ?

(( Direct tatting aka reverse stitch, wrapped stitch, unflipped stitch, hitch, encapsulation, 2nd half of split ring stitch. ))

• I learned Split Quadruple Directional Ring SQDR from Teri’s instructions & diagrams which form part of her bookmark pattern. Can perhaps be called Split Ring with thrown rings or Rings off Split Rings. 
• I don’t have Ruth’s tutorial or instructions for Reverse Ring (RR). But her RainBeau hedgehog pattern instructions/diagram seemed to suggest that it was very similar to SQDR.
• So what is SQDR or RR ? It is a ring worked with direct tatting or like the 2nd half of a split ring.
• We start with a loop of SH1, but use SH2 to make the unflipped stitches, thus moving in a counterclockwise direction.
• Rings can be thrown off this central ring, using SH2.
• The entire central ring can be completed in this fashion & it will be a RR, as in the hedgehog above.
• The central ring can be started as a split ring (SR) & then worked in direct tatting, making it a SQDR. (in this case, rings can also be thrown off with SH1 on the 1^st side of SR), as in the Dandelion ChainLink bookmark pattern where the first part of central ring starts with a single double stitch. The rest of the pattern is worked as a reverse ring with thrown rings.
• In both cases, we are tatting True Rings.
• We need to remember to post the shuttle through ring before closing it.

This video of Rings off Split Rings by Karen Cabrera will give a very good idea of how to work such rings, and the possibilities can be visualized.

• We can get the same effect using SCMR, which is perhaps easier if one is not used to direct tatting. In Self Closing Mock Ring, the central ring is a Mock Ring - a chain, from which rings can be thrown off. It is worked in clockwise direction, with normal Double Stitches. And we need to post the shuttle through the loop left at the beginning, before tensioning it. 
• In SCMR, all thrown rings are limited to SH2 (as in RR).

• Another technique where we can throw rings off a ring is Loop-Tatted Ring on Ring (LTROR). 

I came across this term & tutorial/diagram from  Anastasija P.Yelisejeva

In relation to the above : It is a True Ring. The thrown rings are also true rings, tatted using a loop pulled out from the ring loop itself. Tatting follows a clockwise direction. 

I used LTROR for part of Iris Niebach's doily It has an added advantage of being naturally blipfree, unlike a SCMR.

Another advantage : these can be worked with a single shuttle.

Karen's video for LTROR

To Summarize :

1. In all the above 4 methods, multiple rings can be thrown all around the central ring. And when the central ring if finally closed, the thread(s) emerge at the base/start. 
2. SQDR & RR are worked in counterclockwise direction, and we need to tat the thrown rings from the backside of the work ; LTROR & SCMR are worked all from the front, in clockwise direction.
3. SQDR, RR, SCMR require 2 shuttles ; LTROR can be done with single shuttle & finger tatting.
4. SQDR, RR, LTROR are true rings ; SCMR has a central mock ring.

Which technique one chooses will be determined by ...

• colour placement, when working with 2 colours 
• skill level, 
• pattern requirement, 
• number of shuttles used, etc.

Related Posts : Dandelion ChainLink bookmark using SQDR

all about the padded double stitch
LTROR in Niebach doily, with notes
SSSR with thrown rings in Sunshine Snowflake Lace
Common threads Set I