calling them done

Pin It now!

 Several pieces of my tatted lace over the past months are 'incomplete' if one considers the respective pattern. Yet, I am calling them done. And interestingly, most patterns here were gifted to me by kind and friendly tatters. In no particular order .....

Dora Young's Round Pinwheel doily - from All New Knotless Tatting Designs (1974).

Back in April I had wondered how to continue since I had run out of thread. And Jane McLellan commented 'to leave it as it is'. Sound advice 'coz I really like these arches better than the final circle it turns into. 

Against a different background where the grey shows up. 

In Anchor perle size 8. the diameter is 17.5cm. 

There is a slight overlap at the dips in the arches but that's fine - hardly even visible. And hubby is quite happy with this on his table!

Related Posts - 

https://tipsaroundthehome.blogspot.com/2025/09/flower-in-flesh-in-thread.html

https://tipsaroundthehome.blogspot.com/2026/04/2d-solid-tatting.html

💜💜💜

Centri Rotondo - from Il Lavaro Chiacchierino 7, Mani di Fata (1994)

A while back there was a post in a FB group which mentioned Cyprus tatting where continuous tatting involved simply leaving bare thread right up to the point in the next round where the next element starts. This is visible unlike Mlle Riego who kept the bare thread at the back of work. 

I used this doily pattern, leaving off all decorative picots, to show this spiralling climbing out.

Only 5 rounds tatted in Anchor size 40 measuring 10cm in diameter. Yet I had to snip off two rounds because there was cupping, but I re-tatted only one adding 2ds to the chains. I have come to the conclusion that my chains are more snug than normal.

The pattern was gifted to me, along with her hand-drawn sketch, by Anna Bertini.

Related Posts -

https://tipsaroundthehome.blogspot.com/2025/01/last-and-first.html (slip stitch)

https://tipsaroundthehome.blogspot.com/2020/02/not-one-ring.html

💜💜💜

April Fool's Rose Circle (2016) -

This is merely the center motif which gets repeated in a later round of the doily pattern. This single round in Red Rose perle size 8. measures 9cm in diameter. The full pattern was gifted to me by Erika Tashiro. Hopefully I will complete it some day, but with different threads. Not happy with this perle cotton as seen in the stitches and imagine my surprise when the dye ran!!!

This angle highlights the raised/3D effect where the rings of a running scroll are interlaced one over the other and joined to create Celtic Interlacing and a realistic-looking rose motif. The pattern has very clear colour-coded diagrams, yet I found it easier to refer to my own sketches to confirm how the rings were inserted into each other. 

Related Posts - 

https://tipsaroundthehome.blogspot.com/2018/02/beautiful-hearts.html

https://tipsaroundthehome.blogspot.com/2021/05/rosebud-heart.html

https://tipsaroundthehome.blogspot.com/2022/04/honoured-and-humbled.html

And remember Lauretta Tondelli's Interlaced Onion Rings earring (2024)?

Notice how it uses the same technique to interlace the three rings in an onion ring. In this case, however, the rings get kind of squished resulting in different shapes. This is the only piece I tatted, but single earring is not a new phenomenon for me ;-P

Related Posts - 

https://tipsaroundthehome.blogspot.com/2026/06/multiple-celebrations.html

💜💜💜

Its been a while since I crossed out another box in Natalie's PICOT Bingo 2026 Level 2. This time I am offering the above two models for Celtic Tatting box. (Details: https://www.patreon.com/posts/happy-new-year-147124370 )

💜💜💜

My heartiest thanks to all named in this post (and some who wish to remain anonymous)

leaf me roundup 4

Pin It now!

I can guarantee that you haven't yet had your fill of the Leaf Me Endrucks Sep2024 leaves that have been gracing the last three posts. So here's the final installment, for now at least. Showcasing what our members made with the E15 Leaf Doodle versions 1,2,3 pattern! Details of the game and links to the pattern PDFs can be found here - https://tipsaroundthehome.blogspot.com/2024/09/leafy-game.html and pics from our members in Part 1 , Part 2 , and Part 3 .

27. Paola Bevilacqua

Tatted with Sanbest metallic thread with quite a nice sparkle!

"Earrings, Sanbest metallic yarn,"

"A small composition of leaves and pumpkins, (interpreted by me, shrinking the form and the small leaves). Sanbest gold and green-gray metallic yarn, gold-red master of E. Goosebumps."

"I combined the August job with the September one." 

This is quite a composition! The August reference is to the Veg Patch Endrucks Aug2024 game which required us to tat a pumpkin from either of two patterns. Details can be found in our EP Events doc here - https://docs.google.com/document/d/1ZiNdE53cvqj2cLlxVP-wlga8aocPtzs5/view

28. Reiko Akamatsu

I notice that Reiko has used different colour for the rings and chains in every leaf, making each one almost unique.

Quite an enticing assembly! 

29. Sally Biggers

"For my contribution to the September Game #Leafmeendrucks, I have created 5 leaves from the E15 patterns Doodle #1, #2 and #3. In the photograph, leaf # 1 was created using Doodle #3, leaf #2 was created using Doodle #2 and the ones numbered # 3, #4 and #5 were created from Doodle #1, modified only a little at the base. I attached each leaf to a cloth-wrapped florist wire then bound them all together using floral tape. Lizbeth size 20 threads in the colors 181 Cranberry Bush and 683 Leaf Green Light. Almost ready to add a flower to the mix!"

"#leafmeendrucks leaves and flower completed. The flower petals are based on the E15 Doodles #2 and #3 although they have been oriented with the pointy part facing downward toward the center of the flower and an extra edge of picots added to enhance with some frill. That extra edge hides some 26 gauge silver beading wire so the petals can be shaped more easily."

Clever inversion of the leaves to create the flower petals, and a nice sprig or boutonnière is assembled!

30. Stella Marina

On a tatting spree for sure!

Stella hopes to fill the tree with more leaves since it still looks a bit bare to her. We must ask her if she has a new pic! 

31. Stephanie Mc

"Inspired by the work of Ninetta Caruso. I changed the way to add the wire so that it’s completely hidden by the thread (it’s a sewing thread. So time consuming!!!). I would love to finish it for the end of the weak . Wish me luck and perseverance!"

"So, I haven’t finished yet, but the project is well under way. About 10 more leaves to reach the 24 leaves suggested by Ninetta before assembling the plant!"

Hmm, another update reminder in the works. Hats off to such fine miniature lacework! 

32. Ulrike Klauser

All three leaf doodles tatted!

"Two leaves in a new context. Many thanks to Muskaan. The snowflake is a spontaneous variation of an etsy-pattern."

Ulrike enjoys displaying tatted lace in a mixed media composition.

33. Vani Kattoju

From simple leaf to compound leaf!

An eye-catching 3D flower.

"The leaf doodles from E15, I enjoyed tatting them & have so many ideas & ways to use them .
Here are some simple & compound leaves, great as book mark or a small framed piece and a 3D flower (brooch, clips or just for decorating a vase)"

So we had 33 participants who sent in easily over a 100 leaves, probably closer to 200?. As you would've noticed hardly anybody tatted one single leaf! They not only went in for multiple models, several tweaked, but also creatively gathered them into inspiring compositions and applications ranging from flat to 3D, in  diverse threads, sizes, colours, shapes, and uses! Yet the fount of ideas hasn't dried.  

As with most of our games, new patterns emerged. We encourage our members to share their notes, tweaks, patterns. At least a couple PDFs are currently under construction, a couple already shared, and soon I will post about one such star offshoot which members immediately picked up and tatted within a few days.

For details and links of all our events starting Aug2022, check out our EP EVENTS doc here - https://docs.google.com/document/d/1ZiNdE53cvqj2cLlxVP-wlga8aocPtzs5/view and these are the links to each pattern : 

E15 Leaf Doodle #1 by Muskaan - https://drive.google.com/file/d/1NL5KHsLxOHkfILCTTKojfhHy6B9v9EG3/view

E15 Leaf Doodle #2 by Muskaan - https://drive.google.com/file/d/1i8XWpjtcrvK8C_cfa8KyGvJiXNn_KPP7/view

E15 Leaf Doodle #3 by Muskaan - https://drive.google.com/file/d/1m8chbwS1oD6Xjq4Uwm2R291zdAUL1VJ1/view

Please use the hashtag #Endrucks1920Project, and cite the name of the designer and pattern when you post your version on any social media platform. And the hashtag for this game is #LeafMeEndrucks.

My heartiest thanks to Ninetta Caruso for her constant presence, action, and support, working shoulder to shoulder with me on this ever-growing Project. We both rue the fact that we cannot accomplish all that we want to and only wish life would give us more time ;-D

Many many thanks to all our participants for all your hard work, enthusiasm, encouragement, and contribution!

 

inflating the leaf

Pin It now!

 As part of the ongoing #InflateMeEndrucks game in May, I couldn't resist inflating this leaf! The E15 leaf doodle post was among the top 5 for several days, enticing me constantly. The motif is such a quick tat, that I succumbed.  All links at the end of post ....

This time I made it into a pendant. Although I wouldn't mind tatting a pair as earrings.

The original motif on the left. However since there were absolutely no picots along the edge, I ended up tatting 2 motifs, adding tiny picots on the outer chains.

TIP: If the Chain H is reduced from 6 to 4 stitches (left motif), the leaf comes out flatter.

TIP: Notice that the two motifs are tatted as mirror images. I followed the same diagram, but started with a backside ring.

I had also sewn in the bugle bead vein in both. 

This time I followed Pitsibaa's instructions to the T. And as I had stated, it is certainly easier to sew individual motifs than to join as one tats. More freedom, hassle-free tatting, ....

And I also remembered to blot out any extra glue solution, LOL.

After it had dried, I added the beaded chain for the pendant.

I didn't stuff the center, since I wanted the beaded veins to show through.

Future Idea - Increase the length of the joining picots between the motifs instead of keeping them tiny. So that when it is stiffened for inflation a filigree effect is visible along the seams! 

Relevant Links -

E15 Leaf Doodle #1 pattern - https://tipsaroundthehome.blogspot.com/2023/12/lets-flourish.html

Pitsibaa's video - https://www.youtube.com/watch?v=X0MInK7b65Q

All about the Inflate Me Endrucks game -https://tipsaroundthehome.blogspot.com/2024/05/is-it-plane.html  (including my first model and pictorial)

🍃🍃🍃🙐🙑🙐🙑🙐🙑🙐🙑🍃🍃🍃

And on a side note, here's another way to inflate leaves, LOL. 

This savory snack or side dish is called 'patra' or 'patode'. Arbi/colocasia leaves are layered, rolled, steamed, and sliced. They can be eaten as is (ones on the right), tempered, 'roasted' in little oil for crispiness (like the ones on the left), or deep fried. In Delhi, we don't normally get arbi leaves in the market, so I used to grow my own in pots every monsoon, using the vegetable bulb itself. Then the bought veggies were probably treated and they stopped germinating. Seeds didn't work either. 

Yesterday, my lovely hubby surprised me by finding the leaves in an online store (they have a couple of outlets as well) based in Delhi and bought them without my knowledge! He paid more than the cost of the 6 leaves as delivery charges but it was so worth it. Very good quality, large leaves. The rolled log was at least 12 inches long. After 15 to 20 years, I finally got to make and eat these. Thankfully I hadn't forgotten how, LOL. Plenty of slices still in the fridge. 

TIP: I used the soft silicon spatula to apply the paste between layers. It was so easy, quick, and mess-free!

rabbits multiply

Pin It now!

 This month's game in our FB group is Multiply Me Oct2023 (#MultiplyMeEndrucks). We chose one motif - the Square Diamond motif derived from Endrucks' pattern #37 and asked participants to tat More than One motif. That's it! So far we have 15 participants and 41.5 motifs in various avatars!

If you wish to play along, here's what you need to download - Multiply Me Endrucks Oct2023 - https://drive.google.com/file/d/1IbrmrCCr7VD_ypIA_55kVHpAkQEGS1ZH/view  Check out the range of possible ideas. Our members have already gone beyond the listed ideas!

Since 2020, I have tatted numerous motifs for the main pattern presentation and also because I just so like the design! I had lost count but now took the time to count from my stored pics and they total 21, worked in various threads, shades, and applications.

However, for this game I will only be counting 3 earrings since I sewed in embellishments late last month, and one that I found a few days with only the starting few rounds done! Obviously I had to finish it in order to participate ethically, LOL.

E37 earrings worked from left to right in Lixbeth 20, Anchor pearl cotton 8, and Anchor MC 40. These were the only free motifs I could find in my stash and sewed in beads, teardrops, hooks, etc.

I tried a different style of embellishment for each.

E37 Square Diamond Motif pattern and options by Muskaan (2020) - https://drive.google.com/file/d/1wqAPnOUZwLJ9tEUk55wDZhAMw2qCNFSj/view

Obviously the inclusion of seed beads would've made the earrings look more finished and put together, but I had no energy to tat. Even this sewing was done at the very last moment despite the idea, since I couldn't even garner the energy to gather my beading supplies. 

This is the E37 Snowflake adaptation. Multiplication of motifs not merely in numbers but in the number of repeats! I can't remember what my original design plan was (except for the 6 repeats) or even when I'd started it. However it turned out kind of okay - more like a flower. Yes, a flower flake!

Idea: If the chains on either side ot the thrown ring at the tip, were yo face inwards, it would give a pointier, more snowflakish loo, I think.

It's the first time I have used wide picots in any pattern! Each arm also has a modified stitch count. I can share if there is enough interest. It ruffled something fierce, but blocking flattened it out.

And last but in no way the least is Ninetta's Iris Pendant - a beaded version of the E37 motif adapted for a pendant. When we were planning this game, she offered to tat one in metallic thread and she came up with this beauty and also shared her pattern!

E37 Iris Pendant pattern by Ninetta Caruso (2023) - https://drive.google.com/file/d/1uFUpCDxnvyD7JdqLUjPPhviq6BtwvhD1/view

Against a white background, vertically displayed.

That's all I have for now. We still have a week left and hopefully the rabbits will procreate at a good pace ;-P

awakened

Pin It now!

 The curious student, researcher, and teacher in me was awakened about 4 days back! My shuttles have been lying idle for several weeks, except perhaps a sampler here and there. But last month Ninetta posted a beautiful derivative pattern and some tatters were kind of stumped despite their best intentions and efforts. Some persevered, and some sailed through. Anyways, I was curious why some gave up, and loaded my shuttles for a stepwise pictorial after taking Ninetta's permission. The teacher in me beckoned!

This is Ninetta's Zinnia Flower derived from Endrucks' pattern #10 (from 'Die Schiffchen-Spitzen’,1920, by Frau Eleonore Endrucks-Leichtenstern).

I was privy to the development of this beautiful design back since April. There was cupping initially and through trials and tweaks, she finally had it laying flat. However I did not have any time to test tat.

Anna Tedesco stepped in and even created her own slightly tweaked version without dimpled rings (on the right)! It was Anna who suggested the name Zinnia.

Pattern (for both versions) of E10 Zinnia Flower by Ninetta Caruso ---

https://drive.google.com/file/d/1TmGlBbn1z7khele2a6g-djMlVZ8oRBFw/view

And as so often happens with Endrucks' derivatives, we have tertiary extracts or 'grandchildren' as Anna and Paola B like to joke! These are Anna's Zinnia Petals earrings.

Pattern for E10 Zinnia Petals earrings by Anna Tedesco ---

https://drive.google.com/file/d/1wjm5jpwgu7hCDNopJUxOtHY5xQXSKM-C/view

I worked my model in Red Rose size 20. The variegated was inspired by Lyn Clements' model; not as cheerful as her's, it was the closest I could find in this size. For pictorials, it is best to use thicker thread for clarity.

Pictorial for Ninetta Caruso's E10 Zinnia Flower by Muskaan ---

https://drive.google.com/file/d/13vIapAG6XSvBgOeWJr32PxvpoOIr-I_5/view

I love the way Ninetta joined the ring right at the beginning with a normal picot join! We would probably have made a lock join after the chain, RW, and then start the ring....

However, this method of joining is almost seamless and so smooth! However I fond it easier to do the join. remove slack, and then start the ring by pulling out the loop behind. 

I don't remember doing this before; always something to learn!

UPDATE (Dec2024): This is Patty Dowden's Ring on Picot method ... video- https://m.youtube.com/watch?v=LmMxIBrDpRI

The entire pattern is worked in one pass, moving inwards and outwards. Right up to the stage shown above, the work moves clockwise and remains free. Only this final 6th inner ring starts the process of joining the last repeat to the first.

Another view of my model. It measures 9.5 cms tip-wise and 5 cms as side of hexagon.

A collective of Anna's models worked in metallic threads. 

As Ninetta writes in her pdf, Zinnias symbolize friendship. This motif again reinforces the collaboration between friends and tatters which is the cornerstone of the Endrucks 1920 Project!

Many many thanks to Ninetta, Anna and our enthusiastic Endrucksians ... 

we inspire each other!