Sunday, 21 May 2023

problem

Pin It now!

My previous post 'promised' a 3rd round and also invited you to join in. Good news and bad - my round hasn't quite worked out as I had imagined but the great news is that tatters have already sent in their Gorgeous 3rd (and in some cases even 4th) round. Most have shared their pattern as well. But let the suspense linger till the next post.

I wanted to include another interlacing in this round, this time with a ring. First part is fine but then came the logistics problem! Notice the arrow? If I lock join the chain at this picot, how do I get the large yellow ring to interlace?! See, one should always 'think through' - yeah, I'm no good at that!

I tried a couple of options to no avail especially since this is a very large ring. While at this stage, I can insert the shuttle through the space, it will become harder once more arms are joined. There is one more option I can try - floating or bridging chain, joined back into a mock ring. But with this 40 stitch ring, it will be too much work. Oh, or I could shift to needle instead of shuttle!
Moreover, I am not at all happy with the overall look including the last-minute decision to use black. I was going to use 2 small ring between the arms but then I might get accused of copying another pattern. And seeing the lovelies that have come in, I feel totally inadequate at designing as good a round. So, I might shelve mine for the present till inspiration strikes.

Speaking of inspiration -
It turns out the first 2 rounds/motifs are very similar to Jon Yusoff's beautiful 'Quantiesque' Snowflake'. (free pattern here - https://tatsaway.blogspot.com/2008/12/snowflake.html). During my quick online search for Celtic models/patterns, this one did not show up. The most common were motifs by Rosemarie Peel and Sue Hanson, besides a few others. In the mood to try my own, I thought to improvise with twin rings in the 2nd motif (all models used only a single small ring at the end of the long arms). 

Now both motifs are very basic, beginner level. 
Motif 1 is probably something every antique tatting book begins with after the edgings. Ditto for Motif 2. Nothing proprietary after over a century and half.  
All we do is change the look slightly when we change the count or picot placement, or what we do with it/them subsequently.

Further there are only a very limited ways in which you can interlace, right? Again interlacing dates back to Mlle Riego  if my memory is reliable.Yet, the first impression is very similar to Jon's first 2 motifs [her 2nd motif has twin rings but with a short chain between them; the length of the long arm chain is also shorter than mine]. 

Jon explained all this rationally so much better in response to a self-aggrieved third party complaint.

Another similar start was brought to my notice yesterday. Renulek's 'Plait tatting' motif (free pattern here - https://renulek.blogspot.com/2010/09/frywolitka-pleciuga.html). Was Jon's snowflake the inspiration for Renulek's start? 

I know one thing. In my attempt to Not be influenced by the models that came up in my search, I ended up doing something similar to Jon and Renulek - both exceptional designers! I am nowhere in their league, LOL, as evident in my botched attempt above.

Be ready to be inspired and wowed by the models and patterns coming in .... stay tuned and my 'lazy' friends, keep your shuttles at hand!

Thursday, 18 May 2023

lets design round 3

Pin It now!

 Been quite a while since we played Design Along (DAL). I needed a model to show Celtic tatting with regular shuttles and after searching online I decided to create my own pattern. The first two rounds are tatted and I am trying out the 3rd round joining the 2 interlaced motifs. However, it will be fun to see what design you come up with for the 3rd round! You can design a 4th round, too, if you wish! Come join the fun.

DAL Celtic Snowflake -

Working with Red Rose size 20 threads (equivalent to Lizbeth size 10).

Pattern for Motifs 1 and 2 ---- [schematic of one repeat in the image itself.]

motif 1 pattern and notes - 

  • Ball and shuttle motif, start with ring. 
  • Each ring is joined to previous ring and the last ring is joined back to the first. 
  • All joining picots are very small.
  • Cut and tie and hide ends.
motif 2 pattern and notes - 
  • Ball and shuttle motif, start with left ring. 
  • All picots are very small.
  • This motif tends to twist because of the long chains. Hence, be very careful when you make the final tie to the base of the 1st ring. Make sure all chains are laid our correctly. 
  • Cut and tie and hide ends
  • Block the motif for ease of interlacing.
interlacing motifs 1 & 2 - 
  • Interlace motifs 1 and 2 as seen in the image.
  • Now go ahead and design a Round 3 (and 4?) to link both motifs.
  • TIP: It is a good idea to pin the flake on a polar grid to hold the motifs in place while you sketch out your idea. Or scan your tatted piece and use it as the base for future ideas.
  • Please leave a comment in this post or contact me through Facebook, Instagram, or email with your finished design and model! [all links in right panel top].
Let's have some quick fun!


Sunday, 14 May 2023

crown jewels

Pin It now!

 

No wonder it is called 'Embellishment Tatting'! What a difference adding bling makes to a tatted piece, especially if it is to be used as a piece of jewellery. I shared the red prototype in my previous post (https://tipsaroundthehome.blogspot.com/2023/05/wear-me-endrucks.html) and using the very same counts but with beads and crystals, it got transformed.

It looks like a crown, doesn't it?! Obviously the base needs to be lengthened but still .... Hence I christened it 'Crown Jewels' since it can be used as pendant, brooch, or earrings, or a bride's tikka!

This is closer to how it looks in person - golden and shiny.
Because of the add-ons, this version is tatted with one shuttle and ball, ctm, with small gold beads on both threads.

I owe the idea for the crystals within the top rings to Jill McTats. My own idea had been to add a string of gold beads either as a straight line or as a circle to fill the empty space within. She left a comment suggesting "... sew beads in the two large rings to match the drop you plan ....".

Loved the idea and loved the effect! I tried other colours but this midnight blue seemed to really uplift the piece.

Though not discernible, I combined two metallic threads - Red Heart gold and Sanbest #34 for extra sparkle. Very smooth to work with and no trouble closing the large rings.
Some of the beads and crystals have been sewn in later since it is difficult to estimate the size of the tatting and the gem stock I have. 

Embellishing one's tatted lace is exciting and rewarding, but comes at the cost of time. It took me but a few minutes to tat the plain prototype despite being my first 'trial'; this piece took me every moment I could spare the entire day! At the end I was so 'tired' that the final tails at the base weren't even hidden properly, LOL. 
Hats off to all you wonderful tatters who seem to belt out beaded projects at the drop of a hat!

Future Idea - tweak pattern into a heart, crown, angel.

Many thanks, Jill, for your excellent suggestion!