Final installment of colour Cluny tatting pictorials.
This collage shows the progression
of Colour/striped Cluny
Tatting pictorials I shared this year. While stepwise directions are given for
regular tallies (and a broad one below), the same concept can be applied to
Hanging Cluny Leaves, as seen in the collage center.
Four-Colour Broad Cluny Leaf
(5 threads and 4 colour stripes)
Using 4 colours for Cluny tatting meant the
coloured stripes would show better in a broad tally. Hence I
resorted to a 4-Warp loom and also changed the leaf shape a bit.
Notes and Links :
- how to weave a 4-Warp loom – click to download pdf for stepwise
directions.
- My one small step really comes in handy here since multiple loops need to be closed in the end. It is done Twice in a 4-Warp loom because there are 2 top loops to close at the end.
- Continuing with the braid from the 3 colour tally, I made a split ring, encapsulating the pink and yellow threads on either side. Then I brought in the 5th thread – blue and mustard was again used for the loom.
- I recommend hitching the loom before actual weaving commences. These year-old pics do not show that step.
- how to add new thread and hide the tail in the Cluny leaf.
- how to hide loom colour blip on top.
- Only major steps are shown below. eg. only one pass of a
weave/wrap is shown. But remember to bring the thread back to the side
where it starts.
Brief Pictorial
1. This is a 4-Warp loom. In order
to close tally on the loom itself later,
One Small Step is done twice – under
the AB bar, and again under EF bar.
2. Bring 2 colours/threads to the
right side, making a pass (under-over-under).
Before
this step, I now find hitching the loom helps
center the tally and hide any colour blips. (not shown here, since these pics
were taken a year back).
3. All 4 needles/threads are in
place, 2 on either side.
4. Start weaving with green keeping
yellow below: over-under-over-under to the left.
Return to the right :
under-over-under-over (not shown) to complete 1 weave or wrap.
5. Pick up pink from the left,
entrapping blue within and move to right : over-under-over-under. Return to
left : under-over-under-over (not shown) to complete 1 weave/wrap.
6. Pick up yellow, entrapping green,
and make 1 weave/wrap as in step#4.
7. Pick up blue, entrapping pink,
and make 1 weave/wrap as in step#5.
Remember
to keep tensioning and packing down the weaves.
Note: In this manner, each
needle/thread returns to it’s starting side,
making a single weave colour
strip.
8. Repeat from #4 to #7 to desired
shape and size.
Note: colour placement and width of
each colour strip depends on pattern and desired effect.
(In the flame here I
used 3 colours with broader stripes at the base)
9. The broad 4-coloured striped
tally is complete.
10. Closing the tally and avoiding
colour blip :
bring pink & blue needles from under the AB loop and close
loop by pulling downward at BC.
12. … pull off the EF loop from loom
and close by pulling downwards at FG.
Then
pull the remaining single loom thread upwards at I to finally close the tally
(not shown).
13. One broad 4-colour striped tally
made.
The pic shows the tally first from the front, then from the back.
This collage shows the application
of coloured/striped tallies in various projects.
basic
colour variation practice braid & Jennifer Williams’ motif ;
3-colour
pendant and diya flame prototypes.
I have a couple of practice patterns on the draft board for 3- and 4-colour Cluny leaves but may not be able to get to them till the new year. But stay tuned, one never knows when inspiration to weave may loom large on the horizon!
There are definitely some non-Cluny patterns in the next few posts!